Pioneer SC-55 Owner's Manual - Page 91
Symptoms, Causes, Remedies, Status messages, Remedy - firmware
View all Pioneer SC-55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Additional information 13 Symptoms Causes Remedies Audio playback is undesirably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver. Check whether the audio file was recorded in a format supported by this receiver. Check whether the folder has been damaged or corrupted. Note that there are cases where even the audio files listed as playable on this receiver cannot be played back or displayed (page 51). The LAN cable is currently disconnected. Connect the LAN cable properly (page 28). There is heavy traffic on the network with the Internet being accessed on the same network. Use 100BASE-TX to access the components on the network. When in the DMR mode, depending on the external controller being used, playback may be interrupted when a volume operation is performed from the controller. In this case, adjust the volume from the receiver or remote control. There is a connection routed through a wireless LAN on the same network. There may be a shortage of bandwidth on the 2.4 GHz band used by the wireless LAN. Make wired LAN connections not routed through a wireless LAN. Install away from any devices emitting electromagnetic waves on the 2.4 GHz band (microwave ovens, game consoles, etc.). If this does not solve the problem, stop using other devices that emit electromagnetic waves. Cannot access Windows Media Player 11 or Windows Media Player 12. In case of Windows Media Player 11: You are currently logged onto the domain through your PC with Windows XP or Windows Vista installed. In case of Windows Media Player 12: You are currently logged onto the domain through your PC with Windows 7 installed. Instead of logging onto the domain, log onto the local machine (page 48). Symptoms Causes Remedies Cannot listen to Internet radio stations. The firewall settings for components on the network are currently in operation. Check the firewall settings for components on the network. You are currently disconnected from the Internet. Check the connection settings for components on the network, and consult with your network service provider if necessary (page 78). The broadcasts from an Internet radio station are stopped or interrupted. There are cases where you cannot listen to some Internet radio stations even when they are listed in the list of Internet radio stations on this receiver (page 48). The Home Media Gal- The remote control is not curlery cannot be operated rently set to the Home Media with the buttons on the Gallery mode. remote control. Press HMG to set the remote control to the Home Media Gallery mode (page 48). SIRIUS radio messages Status messages Antenna Error Check Sirius Tuner Acquiring Signal Subscription Updating Updating Channels Invalid Channel Firmware Updating Causes Remedy The SIRIUS antenna is not properly connected. The SiriusConnectTM tuner is not properly connected. Check that the antenna cable is attached securely. Check that the 8 pin mini DIN cable and AC Adapter are attached securely. The SIRIUS signal is too weak at the current location. Check for antenna obstructions and reposition the SIRIUS antenna to get better signal reception. Use the Antenna Aiming option to optimize the antenna position. Unit is updating subscription. Wait until the encryption code has been updated. Unit is updating channels. Wait until the encryption code has been updated. Selected channel is not available/does not exist. The SiriusConnectTM tuner's firmware is being updated. Select another channel. Wait for updating to finish. En 91