Owner's Manual - Page 81
09
Using other functions
Resetting the system
Use this procedure to reset all the receiver's settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONE to MULTI ZONE OFF. ! Disconnect the iPod and USB memory device from the ....
4 Press ENTER to confirm. OK appears in the display to indicate that the receiver has been reset to the factory default settings.
! Note that all settings will be saved, even if the receiver is unplugged.
Default system settings
Setting
Digital Video Converter
SPEAKERS
Speaker System
...
Owner's Manual - Page 83
... their setting procedures, refer to the explanations for the respective items.
Setting Preset recall
Code learning
Direct function Erase learning Back light Reset function All reset Change RC mode
What it does
Preset codes can be set for the various input functions. The remote control codes of a number... settings that are in one input function on page 85.
This is a function for resetting all remote control unit settings you have made to the defaults set upon shipment from the factory. See Resetting the remote control settings on page 86.
If you have multiple Pioneer receivers, amplifiers, etc...
Owner's Manual - Page 86
... the rest of your system
Resetting the remote control settings
Use this procedure to reset all the remote control's settings to the factory default. ! When preset codes are set, all the signals learned in the input function buttons are cleared. This function is
convenient when you want to reset some but not all of...
Owner's Manual - Page 103
... is interrupted before it is completed, start updating over from the beginning. ! The receiver's settings may be reset when the software is updated. Information on the models for which the
settings are reset is provided on the Pioneer website. Check the website before updating.
1 Select 'Software Update' from the Other...the receiver or to fix it to a specific volume (-40 dB Fixed or 0 dB Fixed). This is set to Variable upon shipment from the factory, allowing the volume to be adjusted on the receiver. If you would like to adjust the volume from the connected amplifier, make the setting below...