Pioneer SD-643HD5 Operating Instructions - Page 21

BASIC OPERATIONS - SPLIT/SEARCH screen buttons FREEZE: When this button is pressed with the regular screen, the screen will change to the SPLIT screen and the picture at the time the button was pressed will become the sub-picture, displayed as a frozen image. SPLIT: Press to turn the SPLIT screen function on and off. SEARCH: Press to select the SEARCH screen mode. SWAP: Press to switch the main picture and sub picture when in SPLIT or 3-SEARCH screen mode. SELECT: Selects the screen for switching the channel or input source.*1 SUB CH +, -: Used to switch the channel for the sub- picture of the SPLIT screen. = SLEEP timer button Each time this button is pressed, the display will change as follows. The display varies according to the remaining time. Example: If the remaining time is 100 minutes 100 min. 90 min. 60 min. 120 min. OFF If the remaining time is 45 minutes 45 min. 30 min. 30 min. OFF 60 min. 90 min. 120 min. ~ CH ENTER button Fix the selected channel with the direct channel selection buttons. ! CH RETURN (channel return) button Press to switch between the current channel and the channel you were watching immediately before. @ VOL (volume) +, - buttons Press plus (+) button to increase the volume, press minus (-) button to decrease it. Volume level will appear on the screen as numbers and a bar graph. The maximum volume level is "63". The display will disappear from the screen after 2 seconds. # MENU button Press to turn on the menu screen for use in function selection. Press again to return to normal TV screen. REMOTE CONTROL UNIT FUNCTIONS *1 With the 9-SEARCH screen, the search picture's input source and channel cannot be switched. NOTE: If the remote control unit is left in total darkness for a long period of time, it will not emit light, but will not be damaged. In this case, place it in a bright place for a little while before using it. 21