Pioneer SD-643HD5 Operating Instructions - Page 9

INTRODUCTION INSTALLING THE MONITOR INSTALLATION PRECAUTIONS: • Keep away from magnetic fields The picture may be distorted if strong magnetic fields are nearby. External speakers should be set at least 2 feet (60cm) away from the Projection Monitor. Electric fans and other motor driven appliances and toys may also be sources of magnetism. • Bright light or direct sunlight will dull the picture. Position the Projection Monitor so that the screen faces away from windows. • While the Projection Monitor is operating, it is cooled by airflow through ventilation holes in the rear and bottom. Therefore, avoid placing it in a location where the cooling airflow is hindered (e. g. against a wall). • Avoid places subject to extremely high temperatures or humidity, or to temperatures of 41°F (5°C) or lower. Also avoid dusty places. • If setting the Projection Monitor on a floor made of soft material, make sure that the floor will not damaged by the weight of the Projection Monitor. • Do not put the Projection Monitor on a surface that is tilted, unsteady or prone to shake or vibrate. A shaky or slanted platform is dangerous. • Cover shiny surfaces (floor and walls) with non reflective materials (carpet, rugs, wallpaper, etc.). OPERATING PRECAUTIONS Optimum viewing distance 10 to 23 feet is the range recommended for viewing comfort. Adjust room illumination Excessively bright or dim lighting may strain your eyes. Draw the curtains if necessary to shut out direct sunlight. CARE OF YOUR PROJECTION MONITOR DO NOT: • Do not use strong cleansers, solvents, polishes, or chemically treated cloths to clean the screen or cabinet. • Do not touch or scratch the screen. • Do not fasten or place rubber or vinyl items on the Monitor. • Do not stick adhesive tape onto the Monitor. • Do not put any object on the Monitor. DO: • Use a soft cloth to dust the screen and cabinet. • Handle the screen with care to avoid scratches or damages. • Ask your dealer or a Pioneer authorized service center to clean the interior of the monitor in your area if the picture brightness is too low even with the max. level. This may be caused by dust buildup inside. MAIN POWER STANDBY ON POWER INPUT CH STANDBY ON SET VOL CH MENU RETURN ROSEONMSOLRIGHT VOL PUSH HDTV PROJECTION MONITOR SD-643HD5 Condensation and picture blurring • If the room temperature suddenly rises (or if the Projection Monitor is moved from a cool place to a hot place), condensation may form on the lenses resulting in picture distortion or color fading. If this occurs, simply wait a while (with the power switch ON) and the condensation will disappear. • A gradual change in temperature can prevent condensation from forming. 9