Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 10

CONNECTIONS CONNECTIONS Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections. CONNECTING INPUTS POWER 4 3 SIGNAL GND PHONO DVD/LINE LINE DVD L R OFF ON L CONTROL R SYNC OUT DIGITAL IN CONTROL SYNC OUT AUDIO OUT 1 GND 2 HOT MASTER OUT 1 R L 3 COLD MASTER REC OUT 2 OUT MASTER L ATT. -3 dB -6 dB 0 dB R DIGITAL OUT fs (Hz) 48 k 96 k BOOTH MONITOR (TRS) R L AC IN S-VIDEO DVD S-VIDEO DVD VIDEO OUT MASTER COMPONENT Y CB CR COMPOSITE MONITOR 2 1 SIGNAL GND LINE DVD PHONO DVD/LINE L L CONTROL CONTROL R R DIGITAL IN SYNC OUT SYNC OUT MIC2 MIDI OUT S-VIDEO DVD S-VIDEO DVD USB VIDEO VIDEO S-VIDEO S-VIDEO VIDEO VIDEO LR LR LR LR LR RL Cassette deck, etc. CD player, etc. Analog turntable DJ/VJ DVD player or DJ CD player Pioneer DJ/VJ DVD players or DJ CD players Audio cable connection A DJ/VJ DVD or DJ CD player's audio output connectors can be connected to this unit's DVD, DVD/LINE or LINE connectors. When using the player's digital output, connect to this unit's channel 2 or channel 3 DIGITAL IN connector. Use the AUDIO INPUT selector switch (on top panel of this unit) to select the proper connector. Likewise, the control cord should be connected to the CONTROL connector of the selected channel. Video cable connection A DJ/VJ DVD player's video output connectors can be connected to this unit's DVD, VIDEO, or S-VIDEO connectors. When this is done, use the VIDEO INPUT selector switch (on top panel of this unit) to select the proper connector. Likewise, connect a commercially available sync signal cable to the SYNC OUT connector of the selected channel. DJ/VJ DVD player or DJ CD player Analog turntable Connecting an analog turntable Connect the audio output cables from an analog turntable to this unit's Channel 1 or 4 PHONO input connectors, then set the connected channel's AUDIO INPUT switch (on the upper panel of this unit) to [PHONO]. This unit's PHONO input supports MM cartridges. Connect the ground wire from an analog turntable to the SIGNAL GND terminal of the SVM-1000. • Note that no PHONO input connector is provided for channel 2 and 3. Connecting other line level output devices To use a cassette deck or ordinary CD player, connect its audio output connectors to one of the SVM-1000's LINE input connectors (channel 1 to 4). 10 En