Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 20

USING THE EFFECT FUNCTION 2 Use the effect select buttons to choose a desired image. 3 Touch the image to apply changes. 4 Use the CH SELECT dial to select the desired channel. • In the event no input image is present, the visualizer's image can be used. USING TEXT EFFECTS TEXT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various TEXT effects to the rhythm. When master monitor is off 1 2 3 6 4 5 3 7 8 9 When master monitor is on 1 2 3 6 4 5 7 8 9 1 Effect select buttons 2 [TEXT BANK] buttons 3 TEXT BANK display 4 Effect mode select button Select and touch the desired effect button from the 6 TEXT effects. Touch the text button of your choice from the 6 texts. Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a TEXT BANK from the 10 available. A: Touch to apply the effect to audio only. AV: Touch to apply the effect to both audio and video. V: Touch to apply the effect to video only. 5 Video EFFECT monitor 6 [TEXT EDIT] button 7 [BPM AUTO/TAP] button 8 Parameter display 9 Beat button/beat display Monitors the TEXT effects. Touch to edit the text of the selected [TEXT BANK] button. Touch to switch the measurement method of the BPM between AUTO and TAP. Pressing the TAP button will also switch this to TAP. Displays the measured BPM and effect parameters. Touch to select the multiplication factor of the beat calculated from the BPM for synchronization of effects. 1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode. AUTO: The BPM is automatically measured from the input music signal. TAP: Tap the TAP button with your finger to manually input the BPM. • Whenever power is first turned ON, [AUTO] is selected by default. • The selected mode ([AUTO]/[TAP]) will appear in the display. • When a BPM cannot be measured automatically, the BPM display in the display will flash. • The measurement range of AUTO mode is BPM=70 to 180. Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually input the BPM. 2 Touch the effect category button [TEXT]. • The [TEXT] button will light brightly, and the icon will move as an animation. • The TEXT effect screen will be displayed. 3 Select a text effect using the effect select buttons. • The selected button will appear white, and the icon will move as an animation. • For a description of each effect, refer to P. 30. 4 Choose a text from TEXT BANK. • Rotate the VIDEO FX PATTERN/TEXT BANK dial to select TEXT BANK and touch the [TEXT BANK] button to select the text. • The selected button will appear white. 5 Use the CH SELECT dial to select the channel to which you wish to apply the effect. • The selected effect channel display will be highlighted. • TEXT effects are not supported when [MIC] is selected. Effects are applied to audio only. 6 Touch the effect mode select buttons to choose the effect mode. • The selected button will be highlighted and an animation will appear. A: An effect will be applied to the audio only. AV: An effect will be applied to both the audio and video. V: An effect will be applied to the video only. • When turning the power ON, [AV] will be selected. 20 En