Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 24

USING THE EFFECT FUNCTION 9. ROBOT VIDEO AUDIO VIDEO (*6) AUDIO (*2) VIDEO (*6) AUDIO (*2) VIDEO AUDIO 10. CHORUS Description of the effect Beat button parameter Parameter 1 (TIME/PARAMETER) Description The input sound is given an Sets the effect of the robotic sound effect like that created by a pitch between -100 % and 100 % robot. Sets the effect of -100 to 100 the robotic sound (%) pitch. A robot-like video is created by swinging the image up and down and applying a mosaic filter. Sets the ratio of the mix between the Sets the ratio of the mosaic size and the original video mix between the between -100 % and 100 % mosaic size and the original video. An expansive sound as if various sources were emitting the same sound pitch. For the time of 1 BPM beat, a 1/2 to Sets the interval in 10 to 32 000 32/1 time will be set for the interval of which the chorus (ms) the vibrato of the chorus sound. sound is modulated. A video divided into RGB For the time of 1 BPM beat, a 1/2 to Sets the interval in components is output to the 32/1 time will be set for the interval in which the image beat. which the image returns to the returns to its original. original. Records and repetitively outputs the beat sound. For the time of 1 BPM beat, a 1/8 to Sets effect time. 10 to 4 000 8/1 effect time is be set. (ms) (*3) Parameter 2 (LEVEL/DEPTH) Description The effect is enhanced as the dial is rotated to the right. The up and down swinging is enhanced as the dial is rotated to the right. Sets the balance between the original sound and the chorus sound. Sets the balance between the original video and the effect video. Sets the balance between the original sound and the ROLL sound. Records and repetitively outputs the beat image. For the time of 1 BPM beat, a 1/8 to Sets the time in 8/1 effect time is be set. which the image is repeated. Sets the balance between the original video and the effect video. Records and repetitively outputs the beat sound in reverse. For the time of 1 BPM beat, a 1/8 to Sets effect time. 8/1 effect time is be set. 10 to 4 000 (ms) (*3) Sets the balance between the original sound and the ROLL sound. Records and repetitively outputs the beat video in reverse. For the time of 1 BPM beat, a 1/8 to Sets the time in 8/1 effect time is be set. which the image is repeated. Sets the balance between the original video and the effect video. 12. REVERSE ROLL (*5, 7) 11. ROLL (*5, 7) (*1) When the effect channel display shows [CFA], [CFB], or [MST]/[MASTER], even if the effect monitor is turned ON, if the selected channel's sound is not output to the master output, the effect sound will not be heard. (*2) If effect is set to OFF, the effect sound will not be audible when monitoring effects. (*3) The shortest video effect time value is: For NTSC, 66 ms. For PAL, 80 ms. (*4) The shortest video effect time value is: For NTSC, 99 ms. For PAL, 119 ms. (*5) When the visualizer function is switched from ON to OFF, the visualizer's image will be subjected to ROLL in the sampling state. (*6) When effects are set to OFF, images with effects applied will not be displayed on the video effects monitor. (*7) Effects will be disabled in all channels if copy-protected contents are input to any channel. In other words, in this case effects will not function even if non-copy-protected contents are input to the channel to which you wish to apply effects. Video effect pattern No. Name 1 ORIGINAL 2 INVERSE 3 EDGE 4 HUE Description of video effect pattern Original image without video effect pattern. Inverts brightness. Creates a border around the image. Changes the color (except black and white). 24 En