Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 31

USING THE JPEG VIEWER USING THE JPEG VIEWER JPEG files can be loaded and displayed from USB memory devices and SD cards. Up to eight JPEG files can be loaded. USB JPEG VIEWER SETUP 1 Press the JPEG VIEWER button. The JPEG play mode screen will appear. HI JPEG VIEWER 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0 0 CARD indicator SD CARD BEFORE USING THE JPEG VIEWER Insert a USB memory device or SD card into this mixer. Using a USB memory device Insert a USB memory device containing JPEG files to the USB connector. Only USB memory devices formatted in FAT32 format can be used. Using a SD card Insert a SD card containing JPEG files into the SD CARD slot. • The memory card used must be formatted according to "SD Memory Card Specifications Part2 FILE SYSTEM SPECIFICATION Version1.0" (SD memory cards are formatted in the aforementioned standard upon shipping from their manufacturers). Unformatted memory cards cannot be used. • Memory cards formatted on computers or digital cameras may not operate properly. • Multi-media cards (MMC) cannot be used. • Do not remove the card or turn the power off while the CARD indicator is blinking (doing so may result in damage to the stored data). • Memory cards are delicate electronic devices. Do not bend them, subject them to strong shocks or impacts. Additionally, do not use or store memory cards in environments likely to create static electricity or electrical noise. • Memory cards may be damaged when exposed to impacts or static electricity. Handle them with care. It is strongly suggested that you periodically make copies of important data. • Pioneer will not be held responsible for any loss of data or direct/ indirect damages. 9 7 1 2 4 3 8 5 6 1 [MANUAL Sets the JPEG play mode to MANUAL. MODE] button 2 [AUTO MODE] Sets the JPEG play mode to AUTO. button 3 [FADER MODE] Sets the JPEG play mode to FADER. button 4 [TIME] display/ When in AUTO mode, sets the time for Change buttons changing the JPEG images. 5 [JPEG BOX] Selects the JPEG images that are to be assigned to the channels. 6 Channel select buttons Sets the channel to which JPEG images are to be assigned. Alternatively use to cancel the assigned JPEG. 7 [JPEG SELECT] button Enables JPEG select mode. If operated when effects are ON, a warning message will appear and the screen will not change to the next menu. 8 [CLEAR] button Alternates JPEG BOX clear mode ON/ OFF. 9 [EXIT] button Exits JPEG viewer setup. 31 En