Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 33

USING THE JPEG VIEWER Operating in FADER MODE Using the JPEG images in the JPEG BOX, a slide show can be created with transitions between images at chosen intervals. The channel fader for the assigned channel is used to perform the transitions. 1 Touch the [FADER MODE] button to select FADER mode. 2 Select the images you wish to use from the JPEG BOX. Touch multiple images on the screen and their borders will change to white. Touch again to deselect images. 3 Select the channel to which you wish to assign the images. Touch the channel select button for the channel to which you wish to assign the images, and the image at the upper left of the group of selected images will be displayed on the channel monitor. 4 Operate the fader. Each time the channel fader for the assigned channel is raised from the [0] point, the images will change. Deleting JPEG files downloaded to the JPEG BOX 1 Touch the [CLEAR] button. The [CLEAR] button will flash. 2 Touch the images on the screen that you wish to delete. The instant the image is touched, it disappears from the JPEG BOX. While the [CLEAR] button is flashing, you may continue by deleting other images if desired. • This process does not affect file data on attached SD cards or USB memory devices. 3 Press the [CLEAR] button once again to leave this mode. • Usable JPEG files have a maximum size of 7 MB or about 12 MP. • If the original JPEG file does not fit within 640 x 480 pixels, the file will be automatically resized to 640 x 480 pixels when downloaded to the SVM-1000. 33 En