Pioneer SVM 1000 SVM-1000 Operating Instructions - Page 35
Fader Start Function - dj mixer
UPC - 012562870540
View all Pioneer SVM 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
FADER START FUNCTION FADER START FUNCTION By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback. When the mixer's channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically -and instantly - begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/ CD player returns to its cue point (back cue), thus allowing "sampler" type play. HI FADER START 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0 0 Cross fader lever (A/B) CHANNEL FADER CROSS FADER ASSIGN CROSS FADER START PLAY AND BACK CUE PLAY When the DVD/CD player assigned to cross fader channel A is set to standby at a cue point, moving the cross fader lever from the right (B) side toward the left (A) side automatically starts play on the channel A DVD/CD player. When the cross fader lever reaches the left (A) side, the DVD/CD player assigned to channel B goes to back cue (returns to cue point). Also, when the DVD/CD player assigned to channel B is set to standby at a cue point, moving the cross fader lever from the left (A) side to the right (B) side automatically starts playback on the channel B DVD/CD player. When the cross fader lever reaches the right (B) side, the DVD/CD player assigned to channel A goes to back cue (returns to cue point). Using the Cross Fader to Start Playback 1 Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control. • The button for the selected channel lights. 2 Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B]. • Select [A] to assign to cross fader channel A (left side). • Select [B] to assign to cross fader channel B (right side). 3 Move the cross fader lever to the full opposite side away from the DVD/CD player you wish to start. 4 Set the DVD/CD player to the desired cue point, and engage cue point standby. • If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point. 5 At the instant you wish to start playback, move the cross fader lever (A/B). • DVD/CD player begins playback. • After playback has begun, if the cross fader lever is moved fully to the opposite side, the DVD/CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue). Using the Channel Fader to Start Playback 1 Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control. • The button for the selected channel lights. 2 Set the channel fader lever to [0]. 3 Set the DVD/CD player to the desired cue point, and engage cue point standby. • If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point. 4 At the instant you wish to start playback, move the channel fader lever. • DVD/CD player begins playback. • After playback has begun, if the channel fader lever is returned to the [0] position, the DVD/CD player returns to the cue point and re-enters standby mode (back cue). • Playback control is possible with the channel fader only with the CROSS FADER ASSIGN switch is set to [THRU]. 35 En