Pioneer VSX-43 Owner's Manual - Page 11

Connecting your equipment - no sound

Page 11 highlights

Chapter 2 Connecting your equipment Determining the speakers' application By connecting the left and right front speakers (L/R), the center speaker (C), the left and right surround speakers (SL/ SR), the left and right surround back speakers (SBL/SBR) (or the left and right front height speakers (FHL/FHR)), and the subwoofer (SW), a surround sound system up to 7.1 channel can be enjoyed. The 5.1 channel surround system is the most commonly-used in home theaters. To achieve the best possible surround sound, install your speakers as shown below. 5.1 channel surround system: 6.1 channel surround (Surround back) system: R L C SW R L C SW SR SL SR SL SB 7.1 channel surround (Surround back) system: R L C SW SL SBL SR SBR 7.1 channel surround (Front height) system: FHL L SW FHR R C SR SL Speaker B connection You can use the speakers connected to the B speaker terminals to listen to stereo playback in another room. See Switching the speaker terminal on page 15 for the listening options with this setup. • You will not be able to connect the B speakers if you connect the front height speakers in the main zone. Further, if you use the B speakers, a 5.1 ch playback will be the maximum in the main zone. (No sound is output from the surround back speaker.) R L Speaker B Main zone Bi-amping connection Bi-amping connection of the front speakers for high sound quality with 5.1-channel surround sound. • When using the Front Bi-amping connection, sound will only be output from the front speakers, the surround speakers and the subwoofer. Front Bi-Amp R L SW C SR SL 4 7 62 ZONE 2 connection (Multi Zone) With these connections you can simultaneously enjoy the surround sound in the main zone with stereo playback on another component in ZONE 2 (The selection of input devices is limited). See MULTI-ZONE listening on page 54. Main zone Sub zone R L Important • Both the surround back speakers and the front height speakers can be connected at the same time. In this case, sound will be output from either the front height speaker or the surround back speaker depending on which one was selected in the Speaker System setting (see The Speaker System setting on page 52). 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

2
11
Chapter
4
62
7
Connecting your equipment
Determining the speakers’ application
By connecting the left and right front speakers (
L
/
R
), the
center speaker (
C
), the left and right surround speakers (
SL
/
SR
), the left and right surround back speakers (
SBL
/
SBR
) (or
the left and right front height speakers (
FHL
/
FHR
)), and the
subwoofer (
SW
), a surround sound system up to 7.1 channel
can be enjoyed.
The 5.1 channel surround system is the most commonly-used
in home theaters. To achieve the best possible surround
sound, install your speakers as shown below.
Important
Both the surround back speakers and the front height
speakers can be connected at the same time. In this case,
sound will be output from either the front height speaker or
the surround back speaker depending on which one was
selected in the
Speaker System
setting (see
The Speaker
System setting
on page 52
).
Speaker B connection
You can use the speakers connected to the B speaker
terminals to listen to stereo playback in another room. See
Switching the speaker terminal
on page 15
for the listening
options with this setup.
You will not be able to connect the B speakers if you
connect the front height speakers in the main zone.
Further, if you use the B speakers, a 5.1 ch playback will be
the maximum in the main zone. (No sound is output from
the surround back speaker.)
Bi-amping connection
Bi-amping connection of the front speakers for high sound
quality with 5.1-channel surround sound.
When using the Front Bi-amping connection, sound will
only be output from the front speakers, the surround
speakers and the subwoofer.
ZONE 2 connection (Multi Zone)
With these connections you can simultaneously enjoy the
surround sound in the main zone with stereo playback on
another component in ZONE 2 (The selection of input devices
is limited). See
MULTI-ZONE listening
on page 54
.
SL
L
SW
C
R
R
SR
SL
L
SW
C
SR
SB
5.1 channel surround
system:
6.1 channel surround
(Surround back) system:
C
SL
L
FHL
FHR
SW
R
SR
SL
L
SW
C
R
SR
SBL
SBR
7.1 channel surround
(Surround back) system:
7.1 channel surround (Front
height) system:
L
R
Main zone
Speaker B
SL
L
R
SR
SW
C
Front Bi-Amp
L
R
Main zone
Sub zone