Pioneer VSX-521-K Owner's Manual - Page 26

EQ to switch the EQ Acoustic Calibration EQ ON or OFF. - setup help

Page 26 highlights

05 Listening to your system a. If surround back channel processing (page 27) is switched off, or the surround back speakers are set to NO, DOLBY PLIIx becomes DOLBY PLII (5.1 channel sound). b. You can also adjust the C.WIDTH, DIMEN., and PNRM. effect (see Setting the Audio options on page 28). c. You can also adjust the H.GAIN effect (see Setting the Audio options on page 28). d. You can also adjust the C.IMG effect (see Setting the Audio options on page 28). e. Cannot be selected when the Pre Out is set to Surr. Back (see The Pre Out Setting on page 33). f. • You can choose the STEREO mode by using STEREO button on the remote control. • The audio is heard with your surround settings and you can still use the Midnight, Loudness, Phase Control, Sound Retriever and Tone functions. Note • In modes that give 6.1 channel sound, the same signal is heard from both surround back speakers. Using the Advanced surround BD MENU ADV SURR ADVANCED SURROUND The Advanced surround feature creates a variety of surround effects. Try different modes with various soundtracks to see which you like. ACTION Designed for action movies with dynamic soundtracks. DRAMA ENT.SHOW Designed for movies with lots of dialog. Suitable for musical sources. ADVANCED GAME Suitable for video games. SPORTS CLASSICAL Suitable for sports programs. Gives a large concert hall-type sound ROCK/POP Creates a live concert sound for rock and/or pop music. UNPLUGGED Suitable for acoustic music sources. EXT.STEREO Gives multichannel sound to a stereo source, using all of your speakers F.S.S.ADVANCE (Front Stage Surround ADVANCE) Allows you to create natural surround sound effects using just the front speakers and the subwoofer. Use to provide a rich surround sound effect directed to the center of where the front left and right speakers sound projection area converges. Front left speaker Front right speaker S.R AIR (Sound Retriever AIR) PHONES SURR Suitable for listening to the sound from a Bluetooth wireless technology device. The S.R AIR listening mode can only selected when the ADAPTER input. When listening through headphones, you can still get the effect of overall surround Using Stream Direct AUTO/ DIRECT AUTO SURROUND/ STREAM DIRECT Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed. AUTO SURROUND See Auto playback on page 25. DIRECT Sources are heard according to the settings made in the Manual SP Setup (speaker setting, channel level, speaker distance), as well as with dual mono settings. You will hear sources according to the number of channels in the signal. Phase Control, Acoustic Calibration EQ, Sound Delay, Auto Delay, LFE Attenuate and Center image functions are available. PURE DIRECT Analog and PCM sources are heard without any digital processing. Using the Sound Retriever When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression. DVR/BDR CD CD-R CH ADAPTER TUNER PORTABLE VIDEO S.RETRIEVER SIGNAL SEL VOL  Press S.RETRIEVER to switch the S.RTV (Sound Retriever) ON or OFF. Note • The Sound Retriever is only applicable to 2-channel sources. Listening with Acoustic Calibration EQ You can listen to sources using the Acoustic Calibration Equalization set in Automatically setting up for surround sound (MCACC) on page 19. Refer to these pages for more on Acoustic Calibration Equalization. RECEIVER SLEEP TV SOURCE CONTROL RECEIVER INPUT SELECT DTV/TV INPUT HDD 1 DVD 2 VCR 3 DISP SB CH CH SELECT EQ 4 5 6 CH MIDNIGHT SPEAKERS LEV 7 8 9 PHASE CH S  While listening to a source, press RECEIVER , then press EQ to switch the EQ (Acoustic Calibration EQ) ON or OFF. The MCACC indicator on the front panel lights when Acoustic Calibration EQ is active. • You can't use Acoustic Calibration EQ with Stream Direct mode and it has no effect with headphones. 26 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Listening to your system
05
26
En
05
a.
If surround back channel processing (page 27) is switched off,
or the surround back speakers are set to
NO
,
DOLBY PLIIx
becomes
DOLBY PLII
(5.1 channel sound).
b.
You can also adjust the
C.WIDTH
,
DIMEN.
, and
PNRM.
effect
(see
Setting the Audio options
on page 28).
c.
You can also adjust the
H.GAIN
effect (see
Setting the Audio
options
on page 28).
d.
You can also adjust the
C.IMG
effect (see
Setting the Audio
options
on page 28).
e.
Cannot be selected when the
Pre Out
is set to
Surr. Back
(see
The Pre Out Setting
on page 33).
f.
• You can choose the
STEREO
mode by using
STEREO
button
on the remote control.
• The audio is heard with your surround settings and you can
still use the Midnight, Loudness, Phase Control, Sound
Retriever and Tone functions.
Note
• In modes that give 6.1 channel sound, the same signal is
heard from both surround back speakers.
Using the Advanced surround
The Advanced surround feature creates a variety of surround
effects. Try different modes with various soundtracks to see
which you like.
Using Stream Direct
Use the Stream Direct modes when you want to hear the
truest possible reproduction of a source. All unnecessary
signal processing is bypassed.
Using the Sound Retriever
When audio data is removed during the compression
process, sound quality often suffers from an uneven sound
image. The Sound Retriever feature employs new DSP
technology that helps bring CD quality sound back to
compressed 2-channel audio by restoring sound pressure
and smoothing jagged artifacts left over after compression.
Press S.RETRIEVER to switch the S.RTV (Sound Retriever)
ON or OFF.
Note
• The Sound Retriever is only applicable to 2-channel
sources.
Listening with Acoustic Calibration EQ
You can listen to sources using the Acoustic Calibration
Equalization set in
Automatically setting up for surround
sound (MCACC)
on page 19. Refer to these pages for more on
Acoustic Calibration Equalization.
While listening to a source, press
, then press
EQ to switch the EQ (Acoustic Calibration EQ) ON or OFF.
The MCACC indicator on the front panel lights when Acoustic
Calibration EQ is active.
You can’t use Acoustic Calibration EQ with Stream Direct
mode and it has no effect with headphones.
ACTION
Designed for action movies with dynamic
soundtracks.
DRAMA
Designed for movies with lots of dialog.
ENT.SHOW
Suitable for musical sources.
ADVANCED GAME
Suitable for video games.
SPORTS
Suitable for sports programs.
CLASSICAL
Gives a large concert hall-type sound
ROCK/POP
Creates a live concert sound for rock and/or
pop music.
UNPLUGGED
Suitable for acoustic music sources.
EXT.STEREO
Gives multichannel sound to a stereo
source, using all of your speakers
BD MENU
ADV
SURR
ADVANCED
SURROUND
F.S.S.ADVANCE
(Front Stage
Surround
ADVANCE)
Allows you to create natural surround
sound effects using just the front speakers
and the subwoofer.
Use to provide a rich surround sound effect
directed to the center of where the front left
and right speakers sound projection area
converges.
S.R AIR
(Sound Retriever
AIR)
Suitable for listening to the sound from a
Bluetooth
wireless technology device.
The
S.R AIR
listening mode can only
selected when the
ADAPTER
input.
PHONES SURR
When listening through headphones, you
can still get the effect of overall surround
AUTO SURROUND
See
Auto playback
on page 25.
DIRECT
Sources are heard according to the settings
made in the Manual SP Setup (speaker
setting, channel level, speaker distance), as
well as with dual mono settings. You will
hear sources according to the number of
channels in the signal.
Phase Control, Acoustic Calibration EQ,
Sound Delay, Auto Delay, LFE Attenuate
and Center image functions are available.
PURE DIRECT
Analog and PCM sources are heard without
any digital processing.
Front left
speaker
Front right
speaker
AUTO/
DIRECT
AUTO SURROUND
/
STREAM DIRECT
CH
VOL
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
VIDEO
SIGNAL SEL
S.RETRIEVER
INPUT SELECT
SOURCE
SLEEP
TV
CONTROL
INPUT
RECEIVER
RECEIVER
1
4
7
MIDNIGHT
2
5
8
SPEAKERS
LEV
SB CH
DISP
EQ
PHASE
3
6
9
CH
CH
CH SELECT
S
HDD
DVD
VCR
DTV/TV
RECEIVER