Pioneer VSX-820-K Owner's Manual - Page 20
Switching the speaker system, Making cable connections, HDMI cables - k receiver
UPC - 884938109277
View all Pioneer VSX-820-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
03 Connecting your equipment Switching the speaker system Three speaker system settings are possible using the SPEAKERS button. • Use the SPEAKERS button on the front panel to select a speaker system setting.1 SPEAKERS DIMMER DISPLAY Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Press repeatedly to choose a speaker system option: • SPA - Sound is output from the speakers connected to the A speaker terminals and PRE OUT SURR BACK/FRONT HEIGHT (multichannel playback is possible). • SPB - Sound is output from the two speakers connected to speaker system B (only stereo playback is possible). • SPAB - Sound is output from speaker system A, the two speakers in speaker system B, and the subwoofer. Multichannel sources are downmixed only when the STEREO or ALC mode is selected for stereo output from speaker systems A and B.2 • SP - No sound is output from the speakers. Important • Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet. • Before unplugging the power cord, switch the power into standby. HDMI cables Both video and sound signals can be transmitted simultaneously with one cable. If connecting the player and the TV via this receiver, for both connections, use HDMI cables.3 HDMI cable Be careful to connect the terminal in the proper direction. Note 1 The subwoofer output depends on the settings you made in Speaker Setting on page 43. However, if SPB is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed). 2 You can use speakers with a normal impedance between 6 Ω and 16 Ω. However, be aware that only the front speakers are set to a value between 12 Ω and 16 Ω when you select SPAB. 3 • Set the HDMI parameter in Setting the Audio options on page 38 to THRU (THROUGH) and set the input signal in Choosing the input signal on page 41 to HDMI, if you want to hear HDMI audio output from your TV or flat panel TV (no sound will be heard from this receiver). • If the video signal does not appear on your TV or flat panel TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use a (analog) composite connection. • When the video signal from the HDMI is 480i, 480p, 576i or 576p, Multi Ch PCM sound and HD sound cannot be received. 20 En