Pioneer VSX-823-K Owner's Manual - Page 56

9 • LAST - The HDMI input signal selected previously will be output. This can only be selected when Control is set to OFF. • BD, DVD, SAT/CBL, DVR/BDR, HDMI/MHL, GAME - The HDMI input signal selected here will be output. This can only be selected when Control is set to OFF. • OFF - Signal will not be output during standby. - If the Standby Through setting is not set to OFF, the power consumption during standby will increase. 8 When you're finished, press RETURN. You return to the Home Menu. Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. 2 Turn the power on for all components, with the power for the TV being turned on last. 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not. 4 Check whether the components connected to all HDMI inputs are properly displayed. About synchronized operations The Control with HDMI-compatible component connected to the receiver operates in sync as described below. • Synchronized amp mode - From the menu screen of the Control with HDMIcompatible TV, set audio to be played through this receiver, and the receiver will switch to the synchronized amp mode. - When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver's power is turned off. To turn the synchronized amp mode back on, set audio to be played through the receiver from the TV's menu screen, etc. This receiver will power up and switch to the synchronized amp mode. - When in the synchronized amp mode, the synchronized amp mode is canceled if an operation that produces sound from the TV is performed from the TV's menu screen, etc. - When the synchronized amp mode is canceled, the receiver's power turns off if you were viewing an HDMI input or a TV program on the TV. • Power synchronization with TV - When the TV's power is set to standby, the receiver's power is also set to standby. (Only when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.) • Automatic switching of inputs - The receiver's input switches automatically when the Control with HDMI-compatible component is played. - The receiver's input switches automatically when the TV's input is switched. - The synchronized amp mode remains in effect even if the receiver's input is switched to a component other than one connected by HDMI. Cautions on the Control with HDMI function • Connect the TV and components (Blu-ray Disc player, etc.) directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors. • When the receiver's Control is turned ON, even if the receiver's power is in the standby mode, it is possible to output the audio and video signals from a player via HDMI to the TV without producing sound from the receiver, but only when a Control with HDMI-compatible component (Blu-ray Disc player, etc.) and compatible TV are connected. In this case, the receiver's power turns on and the power and HDMI indicators light. 56 Control with HDMI function 4 7 62