Pioneer VSX-921-K Owner's Manual - Page 17

Hdmi Setup, Signal Sel - arc

Page 17 highlights

Connecting your equipment 02 English Español Connecting your DVD player with no HDMI output This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no HDMI output) to the receiver. • If your player has a component video output, you can connect these too. See Using the component video jacks on page 19 for more on this. • The following connection/setting is required to listen to the sound of the TV over this receiver. - If the TV does not support the HDMI Audio Return Channel function, connect the receiver and TV with audio cables (as shown). - If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 42). Note • In order to listen to the audio from the DVD player that is connected to this receiver using an optical cable or a coaxial cable, first, switch to the DVD input, then use RECEIVER and SIGNAL SEL to choose the audio signal O2 (OPTICAL2) or C1 (COAXIAL1) (see Selecting the audio input signal on page 25). HDMI DVR/BDR IN DVD IN BD IN VIDEO 1 IN OUT COAXIAL IN 1 IN 1 ASSIGNABLE IN OPTICAL 2 ASSIGNABLE VIDEO AUDIO DVR/BDR CD-R/TAPE (CD) (TV/SAT) (CD-R/TAPE) MONITOR TV/SAT BD OUT IN IN OUT L ADAPTER PORT (OUTPUT 5 V 0.1 A MAX) DVR/ BDR OUT IN 1 (DVD) ASSIGNABLE IN 2 (DVR/ BDR) IN DVD IN IN IN R ANTENNA CD FM UNBAL L 75 AM LOOP IN SIRIUS A R FRONT R L IN L IN CENTER MONITOR OUT Y PB PR COMPONENT VIDEO TV/SAT BD R DVD SUBWOOFER PRE OUT HDMI IN TV OPTICAL R L DIGITAL AUDIO OUT ANALOG AUDIO OUT Select one VIDEO OUT If the TV does not support the HDMI Audio Return Channel function, this connection is required to listen to the TV sound over the receiver. R L OPTICAL COAXIAL ANALOG AUDIO OUT DIGITAL AUDIO OUT Select one DVD player 17 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Connecting your equipment
17
En
English
02
02
Connecting your DVD player with no HDMI
output
This diagram shows connections of a TV (with HDMI input)
and DVD player (or other playback component with no HDMI
output) to the receiver.
• If your player has a component video output, you can
connect these too. See
Using the component video jacks
on page 19 for more on this.
• The following connection/setting is required to listen to
the sound of the TV over this receiver.
-
If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with
audio cables (as shown).
-
If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via
the HDMI terminal, so there is no need to connect an
audio cable. In this case, set
ARC
at
HDMI Setup
to
ON
(see
HDMI Setup
on page 42).
Note
• In order to listen to the audio from the DVD player that is
connected to this receiver using an optical cable or a
coaxial cable, first, switch to the
DVD
input, then use
and
SIGNAL SEL
to choose the audio signal
O2
(OPTICAL2) or
C1
(COAXIAL1) (see
Selecting the audio
input signal
on page 25).
RECEIVER
HDMI
VIDEO
COMPONENT
VIDEO
DVR/
BDR
L
R
R
L
Y
P
B
P
R
AUDIO
ANTENNA
OPTICAL
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
A
DVR/BDR
OUT
CD-R/TAPE
L
R
COAXIAL
IN
(
CD
)
1
PRE OUT
SUBWOOFER
IN
IN
CD
MONITOR
OUT
TV/SAT
IN
BD
IN
OUT
IN
DVD IN
IN
TV/SAT
BD
IN
DVD
(
DVD
)
IN
1
MONITOR
OUT
(
DVR/
BDR
)
IN
2
DVR/BDR IN
DVD IN
BD IN
VIDEO 1 IN
(
TV/SAT
)
IN
1
(
CD-R/TAPE
)
IN
2
FM UNBAL
75
(
OUTPUT 5
V
0.1 A MAX
)
ADAPTER PORT
AM LOOP
IN
SIRIUS
FRONT
R
L
CENTER
HDMI
OUT
HDMI IN
R
L
DIGITAL AUDIO OUT
ANALOG AUDIO OUT
OPTICAL
COAXIAL
VIDEO OUT
R
L
DIGITAL AUDIO OUT
ANALOG AUDIO OUT
OPTICAL
Select one
TV
DVD player
Select one
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound
over the receiver.