Pioneer VSX-D509S Owner's Manual - Page 31
Operation
View all Pioneer VSX-D509S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Displays & Controls Display 1 2 3 4 5 6 7 PRO LOGIC DSP DIGITAL ATT SIGNAL SELECT ANALOG DIGITAL DIGITAL DTS MIDNIGHT LOUDNESS DIRECT S.BASS MONITOR MONO TUNED SP AB STEREO EON RDS RF ATT dB 8 9 0- = ~ ! @ 1 DTS indicator Lights when DTS mode is being used. 2 2 PRO LOGIC indicator When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a two channel source. 3 DSP indicator Lights when any Advanced Theater or DSP mode is selected. 4 MIDNIGHT indicator Lights when MIDNIGHT listening mode is in use. 5 DIRECT indicator Lights when source DIRECT is in use. This function bypasses all tone, balance, DSP and Dolby Surround effects. 6 MONITOR indicator Lights when MONITOR is selected to hear a recording as it's being made (see page 45). 7 TUNER indicators MONO: Lights when the mono mode is set using the MPX MODE button. TUNED: Lights when a broadcast is being received. STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. 8 SIGNAL SELECT indicators Light to indicate the type of input signal assigned for the current component (see "Front Panel", -, SIGNAL SELECT). ANALOG : Lights when an analog signal is selected. DIGITAL : Lights when a digital audio signal is selected. 2 DIGITAL : Lights when a DOLBY DIGITAL signal is played. DTS: Lights when a source with DTS audio signals is played. 9 2 DIGITAL indicator When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital. 0 CHARACTER display Shows the radio frequency or function (DVD/LD, CD, etc.) receiver is using . - OVERLOAD indicator This lights when an analog signal is too strong (the SIGNAL SELECT needs to be on ANALOG). It indicates the sound is distorting and the signal should be reduced. = ATT indicator Lights when ATT is used to attenuate (reduce) the level of the input signal (can only be used in ANALOG mode). ~ LOUDNESS indicator Lights when the LOUDNESS, used to boost the bass and treble in quiet listening, is on. ! SPEAKER indicator Shows if the speaker system is on or not. SP 3A and/or B means speakers are switched on. SP 3 means speakers are switched off. @ MASTER VOLUME LEVEL Shows the overall volume level. Volume level is maintained even when the power is off. ---dB indicates the minimum level, and 0dB indicates the maximum level. • Depending on the level settings you make for individual channels, the MAX level can range between -10dB and 0dB. 31 Operation