Plantronics Calisto 7200 User Guide

Plantronics Calisto 7200 Manual

Plantronics Calisto 7200 manual content summary:

  • Plantronics Calisto 7200 | User Guide - Page 1
    Calisto 7200 USB Speakerphone User Guide
  • Plantronics Calisto 7200 | User Guide - Page 2
    3 Connect to PC 4 Daily Use 5 Power 5 Volume 5 Mute/Unmute 5 Answer or End a call 5 Low Battery Behavior 5 Pair with a Bluetooth device 6 Unpair a Bluetooth device 6 Charge 7 Switch between paired devices 8 Clear stored Bluetooth devices 9 Indicator lights explained 10 Security cable 11 Support 12 2
  • Plantronics Calisto 7200 | User Guide - Page 3
    Overview 2 3 1 10 1 Power button 2 Bluetooth® button 3 Speaker 4 Volume up 5 Handset 9 4 5 6 7 8 9 6 Mute 7 Volume down 8 Indicator light 9 Microphones 10 Micro USB port 3
  • Plantronics Calisto 7200 | User Guide - Page 4
    Connect to PC Connect the speakerphone to your computer using a micro USB cable and use the speakerphone to play music or call audio. 1 Connect the USB cable from the USB port on the speakerphone to the USB port on your computer. 2 Set the speakerphone as your default audio device in your computer's
  • Plantronics Calisto 7200 | User Guide - Page 5
    . Press and hold the power button for 2 seconds to power off the device. Volume Mute/Unmute Answer or End a call Low Battery Behavior The speakerphone automatically turns off after 10 minutes of inactivity, if not plugged into a power source. Press the up (+) or down (-) volume buttons for the
  • Plantronics Calisto 7200 | User Guide - Page 6
    blue, momentarily. The device will automatically connect with the speakerphone when in range. Unpair a Bluetooth device After you are finished using the speakerphone with a Bluetooth device, unpair the speakerphone from your device. To unpair the speakerphone do one of the following: 1 Press the
  • Plantronics Calisto 7200 | User Guide - Page 7
    the following: 1 Connect the micro USB cable from the USB port on the speakerphone to the USB port on your computer. 2 Connect the micro USB cable from the speakerphone to a USB plug then plug into an outlet. If the speakerphone is powered on while charging, the power button will pulsate until the
  • Plantronics Calisto 7200 | User Guide - Page 8
    can pair up to 10 devices and connect with up to two devices. However, the speakerphone can only transmit audio for one device at a time. To switch between devices, do one of the following: 1 Turn off Bluetooth on one of the connected devices. 2 Stop playing audio on one device and start playing
  • Plantronics Calisto 7200 | User Guide - Page 9
    Clear stored Bluetooth devices The speakerphone can remember up to 10 paired devices. Clear the Bluetooth cache to remove any data from your device stored on the speakerphone. Press and hold the Bluetooth and volume down (-) buttons for five seconds. An audio tone plays and the indicator light
  • Plantronics Calisto 7200 | User Guide - Page 10
    Indicator lights explained Indicator Amber Blinking amber Pulsing amber Blue Blinking blue Green Blinking green Red White Status Charging battery Low battery Software update Bluetooth paired Pair/discovery mode In a call Incoming call Mics muted Power on 10
  • Plantronics Calisto 7200 | User Guide - Page 11
    Security cable 11
  • Plantronics Calisto 7200 | User Guide - Page 12
    NEED MORE HELP? plantronics.com/support Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States Plantronics BV Scorpius 171 2132 LR Hoofddorp Netherlands © 2018 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Calisto 7200
USB Speakerphone
User Guide