Plantronics Explorer 390 User Guide

Plantronics Explorer 390 Manual

Plantronics Explorer 390 manual content summary:

  • Plantronics Explorer 390 | User Guide - Page 1
    Plantronics Explorer® 380/390 Series User Guide
  • Plantronics Explorer 390 | User Guide - Page 2
    Welcome Congratulations on purchasing a Plantronics headset. This User Guide contains instructions for setting up and using your Plantronics Explorer® 380/390 series headset. Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or
  • Plantronics Explorer 390 | User Guide - Page 3
    What is Bluetooth iv Package Contents, Features and Accessories 1 Charging Your Headset 2 How to Charge Your Headset Using the AC Charger 2 Pairing Your Headset 3 Plantronics QuickPair™ Technology 3 How to Pair Your Phone With Your Headset for the First Time...... 4 How to Pair Your Headset if
  • Plantronics Explorer 390 | User Guide - Page 4
    they have been paired - a quick "handshake" process that connects the two devices. Bluetooth range is up to 33 feet (10 meters). Obstructions such as walls or other electronics devices can cause interference or shorten the effective range. NOTE For optimal performance, place your headset and phone
  • Plantronics Explorer 390 | User Guide - Page 5
    and Features Headset Front Earloop Call control button (on/off) Indicator light Volume control Headset Back Microphone Speaker/eartip Charging jack AC Charger 100 - 240V Plantronics Explorer® 380/390 Series Accessories* Vehicle Charging Adapter #76777-01 USB Headset Charger #76016-01
  • Plantronics Explorer 390 | User Guide - Page 6
    least 20 minutes. A full charge takes approximately two hours. 1 Plug the AC charger into a power outlet. 2 Connect the charger cable to the charging jack on the headset. While your headset is charging, the indicator glows red. When your headset is fully charged, the indicator turns off. Note This
  • Plantronics Explorer 390 | User Guide - Page 7
    of the pairing process, visit www.plantronics.com/ EasyToPair Plantronics QuickPair™ Technology Your new headset includes Plantronics QuickPair technology to simplify the Bluetooth setup process. The first time you turn your headset on, your headset automatically enters pairing mode for 10 minutes
  • Plantronics Explorer 390 | User Guide - Page 8
    . For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone's user guide for more information. 2 Turn the headset on. Press and hold the call control button until the indicator light flashes red and blue. The headset is now in pairing mode. If you don't see the red/blue
  • Plantronics Explorer 390 | User Guide - Page 9
    light continues to flash red and blue. The headset is now in pairing mode. 3 Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Connections > Bluetooth > Search > 3xxPlantronics. See your phone's user guide for more information. 4 If prompted for the PIN
  • Plantronics Explorer 390 | User Guide - Page 10
    the Fit 1 1 Right 2 Left 2 1 To remove the earloop, gently pull up on earloop near the Plantronics name until you hear a snap. To replace, gently snap back onto post. 2 Position earloop as shown above. 3 Place the ear loop behind your ear. 4 Rotate the headset so that the speaker/eartip rests
  • Plantronics Explorer 390 | User Guide - Page 11
    tones. Turn off the headset Press and hold the ring before your headset rings. Wait until you hear the ring in your headset before you press the , and the call is automatically transferred to headset. There is no need to press the Do not use headphones/headsets at high volumes for an extended period of
  • Plantronics Explorer 390 | User Guide - Page 12
    to phone button until you hear a single long low tone. Transfer a call from phone to headset Check battery charge Turn Multi-Point on or off (available on Explorer 390 series only) Hard reset While on a call, press and hold the call control button until you hear a single short low tone. While
  • Plantronics Explorer 390 | User Guide - Page 13
    Using More Than One Bluetooth Phone [Explorer 390 series only] Plantronics Explorer 390 supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. How to Enter Pairing Mode if Headset Was Paired Before While the headset is off, press and hold the
  • Plantronics Explorer 390 | User Guide - Page 14
    Status Powering on Powering off Standby Charging battery Low battery Pairing mode Missed call Incoming call Headset Indicator Light Steady blue, then intermittent flashes in standby mode. Red appears, then turns off. Blue intermittent flashes. Red solid light. Light indicator turns off when the
  • Plantronics Explorer 390 | User Guide - Page 15
    each double tap. With the headset on, press the call control button for 2 seconds to activate the voice dialing. NOTE To use voice-activated dialing, the voice-dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions. When receiving an incoming call, press
  • Plantronics Explorer 390 | User Guide - Page 16
    Troubleshooting My headset does not work with my phone. Headset was not in pairing mode when mobile phone menu selections were made. See page 5 "Pairing Your Headset." Incorrect menu selections were made on your mobile phone. See page 5 "Pairing Your Headset." I did not enter my PIN code/ passkey
  • Plantronics Explorer 390 | User Guide - Page 17
    /Usage Temperature 50F - 104F (10C - 40C) Version Bluetooth 2.1 EDR with Secure Simple Pairing Supports Bluetooth hands-free and headset profiles. * Battery enabled. Performance may vary by the devices you pair with and the number of active pairings. Battery life may be reduced if multipoint
  • Plantronics Explorer 390 | User Guide - Page 18
    end user with the original purchase receipt. We will at our option, repair or replace the products that do not conform to the warranty. We may use functionally equivalent reconditioned/refurbished/remanufactured/pre-owned or new products or parts. To obtain service in the U.S., contact Plantronics
  • Plantronics Explorer 390 | User Guide - Page 19
    www.plantronics.com/healthandsafety for more information. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user's authority with the instructions, may cause harmful interference to radio communications. EXPOSURE TO RADIO FREQUENCY RADIATION RSS 210 Industry Canada Radio
  • Plantronics Explorer 390 | User Guide - Page 20
    , CA 95060 United States Tel: 800-544-4660 www.plantronics.com © 2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logo are owned by
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Plantronics Explorer
®
380/390 Series
User Guide