Plantronics MDA200 User Guide

Plantronics MDA200 Manual

Get Plantronics MDA200 PDF manuals and user guides View all Plantronics MDA200 manuals
Add to My Manuals
Save this manual to your list of manuals

Plantronics MDA200 manual content summary:

  • Plantronics MDA200 | User Guide - Page 1
    MDA200™ Audio Switcher User Guide
  • Plantronics MDA200 | User Guide - Page 2
    Plus HL10 lifter and Power Supply (sold separately) 10 Desk Phone Plus EHS Cable 12 Computer: Connect and Call 13 Connect Your Computer and Place a Call 13 MDA200 LED Indicators 14 Daily Use 15 Answer an Incoming Call 15 Place an Outgoing Call 15 Switch Calls 15 Troubleshooting 16 Desk Phone 16
  • Plantronics MDA200 | User Guide - Page 3
    Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your MDA200 audio switcher. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. 3
  • Plantronics MDA200 | User Guide - Page 4
    What's in the Box Telephone Interface Cable MDA200 Audio Switcher 4
  • Plantronics MDA200 | User Guide - Page 5
    button 2 Desk phone talk button 8 3 USB headset/USB wireless adapter port 10 (headset and adapter not included) 4 USB cable (connect to computer) 5 Handset lifter/EHS cable jack 6 Telephone interface cable jack 7 Power jack 8 Configuration slide switch 9 Listening volume dial 10 Speaking
  • Plantronics MDA200 | User Guide - Page 6
    Lifter Automatically lifts handset and returns it to the cradle. Enables remote call answer/end with your headset. 4 A C Power Supply Required when using the HL10 lifter. 5 U SB Extension Cable Extends the length of the USB cable between the MDA200 and computer. See plantronics.com/accessories for
  • Plantronics MDA200 | User Guide - Page 7
    your Plantronics supported USB corded headset or wireless USB headset adapter to the MDA200 USB headset port.* NOTE Your headset will continue to function as if it were connected directly to the computer. *For a list of supported headsets and wireless USB headset adapters see plantronics.com/support
  • Plantronics MDA200 | User Guide - Page 8
    phone (standard) or Desk phone +HL10 lifter and power supply continue below. If you will be using the Desk Phone + EHS cable, refer to EHS Getting Started guide that came with your EHS cable or at plantronics.com/accessories for installation instructions. Desk Phone (standard) 1 Connect one end of
  • Plantronics MDA200 | User Guide - Page 9
    the bottom of the switcher, ensure the configuration slide switch is set to "A", the listening volume dial is set to 3 and the speaking volume dial is set to 2. 3 Remove the handset from desk phone cradle. 4 While wearing your headset, press the desk phone talk button on the MDA200. 5 If you do not
  • Plantronics MDA200 | User Guide - Page 10
    one end of the power supply into the power jack on the back of the MDA200 and the other end into a working power outlet. USE 2 Firmly press the handset lifter power cord into the handset lifter jack. 3 While wearing your headset, slide the handset lifter arm under the handset until the lifter base
  • Plantronics MDA200 | User Guide - Page 11
    a Dial Tone 1 If you do not hear a dial tone, raise the lifter height switch to the next highest position. 2 Repeat steps 3 through 6 above as necessary until you Required) Use extender arm when the handset lifter needs additional stability lifting and returning handset to cradle. Extender Arm 1
  • Plantronics MDA200 | User Guide - Page 12
    ringer microphone only when the telephone speaker is not located directly under the handset. 1 Remove cover from ringer microphone jack on back of lifter. 2 Connect the end of the EHS cable to the MDA200 and the other end to the desk phone as described in the EHS Adapter Getting Started guide. 12
  • Plantronics MDA200 | User Guide - Page 13
    and Call Connect Your Computer and Place a Call 1 Connect the USB cable from the MDA200 to the computer. The computer talk button LED will be solid green. 2 While wearing headset, dial test call from computer softphone. 3 End call by pressing the computer talk button on the MDA200. NOTE To use call
  • Plantronics MDA200 | User Guide - Page 14
    red Firmware update in process - follow firmware update instructions to clear once complete. Solid red Flashing red Over current condition - using HL10 without power supply. Unplug MDA200, add power adapter, re-plug MDA200 to PC. Headset fault - replace headset and power cycle the MDA200. When
  • Plantronics MDA200 | User Guide - Page 15
    by pressing the computer talk button. Softphone Compatibility Remote call answer/end from the headset is available for compatible softphones with no additional steps except when using Skype™. For a list of compatible softphones visit plantronics.com/software. For Skype support, please follow these
  • Plantronics MDA200 | User Guide - Page 16
    listening volume dial on the switcher. Make sure the lifter is lifting the handset high enough to operate the hookswitch; set to a higher setting if necessary. If you are using a wireless headset, ensure your headset is subscribed to the USB adapter. See subscription instructions that came with your
  • Plantronics MDA200 | User Guide - Page 17
    - Launch Audio Devices Control Panel. Ensure that you are using a compatible softphone application. For a list of compatible softphones, visit plantronics.com/ software. If you are using a wireless headset, ensure your headset is subscribed to the USB adapter. See subscription instructions that came
  • Plantronics MDA200 | User Guide - Page 18
    Netherlands EEE Yönetmeliğine Uygundur © 2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, MDA200, and HL10 are trademarks or registered trademarks of Plantronics, Inc. Windows, Windows 7, Windows Vista, and Windows XP are registered trademarks of Microsoft Corporation in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
MDA200
™
Audio Switcher
User Guide