Polaroid FLM 2011 Operation Manual - Page 32

Operations in VGA /YPbPr mode Select VGA/YPbPr mode 1 Press the SOURCE button on the SOURCE unit or button on the remote TV control. The screen displays the menu shown as right. 2 Press CH5/6 to highlight the VGA or AV 1 AV 2 SVIDEO YPbPr/YCbCr VGA YPbPr/YCbCr item. Press VOL+/- or VGA wait about 4 seconds and the signal source is selected. CLK PC signal format Connect VGA input and be sure that there is VGA input signal. The signal format should be set to: 640 x 480@60Hz. Note: The resolution of the LCD panel is 640 x 480; any higher resolution output from your PC Video card might not come in clear. Auto adjusting When VGA signal format is changed or when you switch to VGA mode from another source, the unit adjusts frequency and phase automatically to obtain the best display. During the process of Analog RGB Acquiring Signal auto correction, the screen displays Analog RGB Acquiring Signal, and all buttons on the set and on the remote control do not work until this process is finished. When the set displays some nonstandard VGA signals and can not adjust the picture to the best status by itself, you can adjust it again by pressing the AUTO. ADJ button on the remote control. NOTE: Please note your final phase and frequency settings as you might need to re-adjust your screen. 29