Poulan 917GWN42B User Manual

Poulan 917GWN42B Manual

Get Poulan 917GWN42B PDF manuals and user guides View all Poulan 917GWN42B manuals
Add to My Manuals
Save this manual to your list of manuals

Poulan 917GWN42B manual content summary:

  • Poulan 917GWN42B | User Manual - Page 1
    gauge wheels with tractor on a flat level surface. • Adjust mower to desired cutting height (See your tractor owner's manual). 136187 Rev. 4 03.15.07 BY GAUGE WHEEL MOUNTING BRACKET 3/8-16 LOCKNUT 3/8 WASHER 01231 SHOULDER BOLT GAUGE WHEEL 17/32 WASHER FIG. 3 REPAIR PARTS GWN42B 5 9 2 10
  • Poulan 917GWN42B | User Manual - Page 2
    pendant que la tondeuse soit en opération. Assurez vous qu'ils soient bien réglés pour assurez l'opération totale de la tondeuse. • Montez les supports de roue quand le tracteur est sur un terrain plat. • Réglez la tondeuse à la hauteur de coupe désirée (Voir e Manuel de l'Opérateur). 136187 Rev
  • 1
  • 2
ATTACH GAUGE WHEEL BRACKETS
(See Fig. 2)
•
Place L.H. gauge wheel mounting bracket to the inside
of the deck housing tab.
•
Assemble carriage bolt and locknut as shown. Do not
tighten at this time.
NOTE:
Carriage bolt head is to
underside of mower deck housing.
•
Assemble (2) two hex bolts and locknuts as shown.
•
Tighten all hardware securely.
•
Repeat for R.H. gauge wheel mounting bracket.
136187 Rev. 4
03.15.07
BY
Printed in U.S.A.
KEY PART
NO. NO.
DESCRIPTION
1
404785
Bracket, Gauge Wheel R.H.
2
404784
Bracket, Gauge Wheel L.H.
4
174873
Wheel, Gauge
5
193406
Bolt, Shoulder
6
73930600
Locknut 3/8"
7
19171512
Washer 17/32
8
72140505
Bolt, Carr.5/16-18 x 5/8"
9
74780412
Hex Bolt 1/4-20 x 3/4"
10
73510500
Locknut 5/16
11
19121414
Washer 3/8
12
73510400
Locknut 1/4-20
REPAIR PARTS
GWN42B
9
4
5
6
11
10
8
1
10
4
11
5
8
2
6
12
12
9
7
7
42" MOWER DECK GAUGE WHEEL KIT (917.GWN42B)
Kit Contains:
(1) Gauge Wheel Bracket R.H.
(1) Gauge Wheel Bracket L.H.
(2) Gauge Wheels
(*) Mounting Hardware
FIG. 1
FIG. 2
REMOVE AND DISCARD
CARRIAGE BOLTS AND
NUTS
LOCKNUTS
CARRIAGE
BOLT
HEX BOLTS
LOCKNUT
L.H. GAUGE WHEEL
MOUNTING
BRACKET
DECK
HOUSING
TAB
FIG. 3
01231
GAUGE
WHEEL
MOUNTING
BRACKET
3/8 WASHER
3/8-16
LOCKNUT
GAUGE WHEEL
SHOULDER
BOLT
17/32 WASHER
PREPARE MOWER DECK (See Fig. 1)
•
Remove and discard the two (2) carriage bolts and nuts
from top of mower deck where gauge wheel brackets
are to be assembled.
ASSEMBLE GAUGE WHEELS TO MOWER
DECK (See Fig. 3)
The gauge wheels are designed to keep the mower deck
in proper position when operating mower. Be sure they
are properly adjusted to ensure optimum mower perfor-
mance.
•
Assemble gauge wheels with tractor on a flat level
surface.
•
Adjust mower to desired cutting height (See your tractor
owner's manual).
•
With mower in desired height of cut position, gauge
wheels should be assembled so they are slightly off
the ground. Install gauge wheel in appropriate hole with
shoulder bolt, 17/32 washer, 3/8 washer, and 3/8-16
locknut and tighten securely.
•
Repeat for opposite side installing gauge wheel in same
adjustment hole.