Poulan B8527ES User Manual

Poulan B8527ES Manual

Get Poulan B8527ES PDF manuals and user guides View all Poulan B8527ES manuals
Add to My Manuals
Save this manual to your list of manuals

Poulan B8527ES manual content summary:

  • Poulan B8527ES | User Manual - Page 1
    IMPORTANT MANUAL Do Not Throw Away OWNER'S MANUAL MODEL NUMBER: B8527ES SNOW THROWER WARNING: Read the Owner's Manual and follow all Warnings and Safety Instructions. Failure to do so can result in serious injury. Always Wear Eye Protection During Operation 403919 Rev. 2 05.03.06 BY Printed in
  • Poulan B8527ES | User Manual - Page 2
    startup. CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot understand and follow all instructions on the machine and in the manual(s) before operating this powered equipment Vibration is generally a warning of trouble. from the truck or trailer and refuel
  • Poulan B8527ES | User Manual - Page 3
    . Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit. Please read and retain this manual. The instructions will enable you to assemble
  • Poulan B8527ES | User Manual - Page 4
    PARTS PACKED SEPARATELY IN CARTON ASSEMBLY / PRE-OPERATION Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiarize you with the unit, which will assist you in assembly, operation and
  • Poulan B8527ES | User Manual - Page 5
    ASSEMBLY / PRE-OPERATION NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates. UNFOLD UPPER HANDLE 1. Raise upper handle to the operating position and tighten handle knobs securely. INSTALL SPEED CONTROL ROD (See Figs. 1
  • Poulan B8527ES | User Manual - Page 6
    spring. CONTROL ARM AUGER CONTROL ROD RUBBER SLEEVE INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7) NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head. 1. Place discharge chute assembly on top of chute base with discharge opening toward front
  • Poulan B8527ES | User Manual - Page 7
    yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your snow READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS BEFORE USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IGNITION KEY. INSERT
  • Poulan B8527ES | User Manual - Page 8
    GASOLINE FILLER CAP MUFFLER CHOKE CONTROL PRIMER SAFETY IGNITION KEY FUEL SHUT-OFF VALVE ON / OFF SWITCH NOTE: ITEMS ABOVE ARE SHOWN IN THEIR TYPICAL LOCATION ON THE ENGINE. ACTUAL LOCATION MAY VARY WITH THE ENGINE ON YOUR UNIT. OPERATION ELECTRIC START BUTTON RECOIL (AUXILIARY) STARTER
  • Poulan B8527ES | User Manual - Page 9
    DISCHARGE (See Figs. 11 & 12) WARNING: Snow throwers have exposed rotating parts, which can cause severe injury from contact, or from material thrown from the chute or auger become clogged, shut-off engine and wait for all moving parts to stop.Use the clean-out tool, NOT YOUR HANDS, to unclog the
  • Poulan B8527ES | User Manual - Page 10
    tool to dislodge this blockage. When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting. • Release the auger
  • Poulan B8527ES | User Manual - Page 11
    and wait for all moving parts to stop. 2. Adjust . To avoid engine problems, the fuel system . See Storage Instructions for additional information reversed, providing additional service before requiring replacement. OIL" in the Maintenance section of this manual. WARNING: Do not use the electric
  • Poulan B8527ES | User Manual - Page 12
    - RECOIL STARTER SNOW THROWING TIPS 1. Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT turn the key. Keep conditions. See "TO ADJUST SKID PLATES" in this section of this manual. • For extremely heavy snow, reduce the width of snow removal by
  • Poulan B8527ES | User Manual - Page 13
    instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual schedule in this manual. NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure
  • Poulan B8527ES | User Manual - Page 14
    the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See "TO REMOVE WHEELS" in the Service and Adjustments section of this manual). 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 2. Clean area around drain
  • Poulan B8527ES | User Manual - Page 15
    is discharged, see "TO CONTROL SNOW DISCHARGE" in the Operation section of this manual. SHEAR BOLTS (See Fig. 18) AUGER SHEAR BOLTS Both right and left-hand and move throttle control to by a qualified service center. STOP position. Wait for all moving parts to stop. NOTE: It is recommended that
  • Poulan B8527ES | User Manual - Page 16
    SERVICE AND ADJUSTMENTS WARNING: Belt replacement requires separation of the snow thrower from snow thrower. 3. REMOVE BELT COVER - See "TO REMOVE BELT COVER" in this section of this manual. 4. REMOVE ENGINE PULLEY - Remove bolt, lockwasher and flat washer securing pulley to engine crankshaft. Remove
  • Poulan B8527ES | User Manual - Page 17
    Service and Adjustments section of this manual). 3. Lubricate as shown in the Maintenance section of this manual. 4. Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts and/or dirt in your gasoline will cause problems. • If possible, store your snow thrower
  • Poulan B8527ES | User Manual - Page 18
    TROUBLESHOOTING See appropriate section in manual unless directed to an authorized service centre/department. PROBLEM CAUSE CORRECTION ON position). 5. Move to FULL position. 6. Prime as instructed in the Operation section of this manual. 7. Wait a few minutes before restarting, DO NOT prime.
  • Poulan B8527ES | User Manual - Page 19
    SERVICE NOTES 19
  • Poulan B8527ES | User Manual - Page 20
    our option, without charge for parts or labor incurred in replacing parts, any part which we find to be , and maintained in accordance with the instructions furnished. This Warranty does not apply must return the product to an authorized service dealer. Should you have any unanswered questions
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
OWNER'S MANUAL
MODEL NUMBER:
B8527ES
SNOW THROWER
Always Wear Eye Protection During Operation
IMPORTANT MANUAL
Do Not Throw Away
WARNING:
Read the Owner's Manual and
follow all Warnings and Safety
Instructions.
Failure to do so
can result in serious injury.
403919 Rev. 2
05.03.06
BY
Printed in U.S.A.