Poulan CL36A User Manual

Poulan CL36A Manual

Poulan CL36A manual content summary:

  • Poulan CL36A | User Manual - Page 1
    Use only a recommended replacement container. DWoAnoRt oNpeINratGe mower unless container is properlyissubject to wear and detierioration. OWNER'S MANUAL Model No. CL36A Poduct No. 954 12 00-93 36 Inch Mower Grass Catcher • Assembly • Operation • Customer Responsibilities • Repair Parts 532175732
  • Poulan CL36A | User Manual - Page 2
    for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all instructions in the manual and
  • Poulan CL36A | User Manual - Page 3
    Ride-On Mowers of your tractor. CAUTION: In problems you cannot easily remedy, please contact your nearest authorized service center/ department. They have competent, well trained technicians and the proper tools to service or repair this unit. Please read and retain this manual. The instructions
  • Poulan CL36A | User Manual - Page 4
    yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in
  • Poulan CL36A | User Manual - Page 5
    BAG OF PARTS CONTENTS (continued) GROUP "D" (2) Latch Hook Assembly LOWER CHUTE ASSEMBLY TO MOWER DECK (2) Screw #10 x 5/8 (2) Washer, Lock #10 (2) Washer 3/16 x 3/4 x 16 Ga. (2) Nut, Weld #10 GROUP "E" CHUTE LATCH ASSEMBLY TO UPPER CHUTE (1) Screw #10 x 1-1/8 (1) Spacer, Split #10 (2)
  • Poulan CL36A | User Manual - Page 6
    CATCHER CONTAINERS LOWER CHUTE LOWER CHUTE ATTACHING STRAPS NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position. THESE ARE THE TOOLS YOU WILL NEED TO ASSEMBLE YOUR GRASS CATCHER: (1) 3/8" Wrench
  • Poulan CL36A | User Manual - Page 7
    BOTTOM FIG. 1A If your tractor does not have four (4) shoulder bolts installed on the drawbar, follow the instructions below. Use Hardware - - CORNER RIBS SELF TAPPING SHOULDER BOLTS 3 SUPPORT POST (See Fig. 3) Use Hardware - - GROUP "B" CAUTION: Container support is spring loaded and locked to
  • Poulan CL36A | User Manual - Page 8
    of another person for mounting assembly to tractor. 1. Raise seat on tractor to allow assembly to be mounted. 2. With cover closed, lift assembly and place support post inside mounting bracket. Allow assembly separate container halves and repeat instructions above. 02097 W DrenlndyoitesAlnyds.
  • Poulan CL36A | User Manual - Page 9
    left container at center support. 2. Close cover and lock latch handle over center support tube. COVER LATCH into latch hole at front of mower deck. 6. Hook rear latch down into latch hole at back of mower deck. CAUTION: Do not remove discharge guard from mower. Raise and hold guard when attaching
  • Poulan CL36A | User Manual - Page 10
    WASHER 3/16 x 3/4 x 16 Ga. FIG. 8 02102 RUBBER LATCH WELD NUT 10 LEVEL MOWER DECK No hardware required Be sure deck is properly leveled for best mower performance. See your tractors owner's manual for instructions. LOCK WASHER 9 UPPER CHUTE (See Figs. 9A & 9B) No hardware required 1. Lower
  • Poulan CL36A | User Manual - Page 11
    mower operation instructions in your tractor owner's manual. When operating your grass catcher on a lawn where grass and leaf at center supports. j. Close cover and secure latches over center support tubes. Care should be taken not to damage the parts and that the ball moves freely at the
  • Poulan CL36A | User Manual - Page 12
    mower blades must be kept sharp. Replace bent or damaged blades. • See BLADE CARE instructions in your tractor owner's manual. CAUTION: BEFORE PERFORMING ANY MAINTENANCE,SERVICE and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components
  • Poulan CL36A | User Manual - Page 13
    NOTES 13
  • Poulan CL36A | User Manual - Page 14
    REPAIR PARTS / PIÈCES DE RECHANGE GRASS CATCHER - - MODEL NUMBER CL36A / RAMASSE-HERBE - - NUMÉRO DE MODÈLE CL36A PRODUCT NUMBER 954 12 00-93 / NUMÉRO
  • Poulan CL36A | User Manual - Page 15
    NUMBER 954 12 00-93 / NUMÉRO DE PRODUIT 954 12 00-93 15 KEY PART NO. NO. 2 53269180 3 532127533 4 532171061 5 532128598 6 818021008 7 532140572 8 Manual Entretoise de couvercle Ressort de couvercle C.D. Poteau de soutien Écrou frein 5/16 x 18 Ressort de retenue Boulon H 5/16-18 x 3/4 Support
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

WARNING
Do not operate mower unless container is properlyissubject to wear and detierioration. Check bag frequently. Replace whencracked or damaged. Use only a recommended replacement container.
WARNING
Do not operate mower unless container is properlyissubject to wear and detierioration. Check bag frequently. Replace whencracked or damaged. Use only a recommended replacement container.
02084
Assembly
Operation
Customer Responsibilities
Repair Parts
OWNER’S MAN
U
AL
Model No. CL36A
Poduct No. 954 12 00-93
36 Inch Mower
Grass Catcher
532175732
Rev. 2
8.20.03
rad
Printed in U.S.A.