Home » Poulan Manuals » Lawn & Garden » Poulan P3314WSA » Manual Viewer

Poulan P3314WSA User Manual

Poulan P3314WSA Manual

Get Poulan P3314WSA PDF manuals and user guides

View all Poulan P3314WSA manuals

Add to My Manuals
Save this manual to your list of manuals

Poulan P3314WSA manual content summary:

Poulan P3314WSA | User Manual - Page 1
at: Registre su producto en línea en: Enregistrez votre produit en ligne à l'adresse : www.poulan.com Instruction Manual Manual de Instrucciones Manuel d'Instructions P3314 / P3314WS / P3314WSA P3416 / P3516PR / P4018WM P4018WT / P3818AV P4018AV / P4018AV BH For Occasional Use Only WARNING: Read
Poulan P3314WSA | User Manual - Page 2
hand until the engine starts. SAFETY RULES WARNING: Always disconnect spark plug wire and place wire where it cannot contact spark plug to prevent accidental starting when setting up, transporting, ad- justing or making repairs except carburetor adjustments. Because a chain saw is a high-speed
Poulan P3314WSA | User Manual - Page 3
, refer to CARBURETOR ADJUSTMENT. S Never modify your saw in any way. S Keep the handles dry, clean, and free of oil or fuel mixture. S Keep fuel and oil caps, screws, and fasteners securely tightened. S Use only Poulan accessories and replacement parts as recommended. HANDLE FUEL WITH CAUTION
Poulan P3314WSA | User Manual - Page 4
branch, do not let the guide bar contact branch or other objects around it. S Keep your saw chain sharp and properly tensioned. A loose or dull chain can increase the chance of kickback occurring. Follow manufacturer's chain sharpening and maintenance instructions. Check tension at regular intervals
Poulan P3314WSA | User Manual - Page 5
features will not totally eliminate this danger. As a chain saw user, do not rely only on safety devices. You must follow all safety precautions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury. S Reduced--Kickback Guide Bar
Poulan P3314WSA | User Manual - Page 6
kickback angle (CKA) Table MODEL P3314 / P3314WS P3314WSA P3416 / P3516PR P4018WM / P4018WT P3818AV / P4018AV P4018AV BH BAR P/N Length CHAIN P/N CKA without chain brake 952044368 14″ 952051209 33_ 952044370 16″ 952051211 33_ 952044418 18″ 952051338 33_ NOTE: If this saw is to be used for
Poulan P3314WSA | User Manual - Page 7
true during the first few times you use your saw. Always check chain tension each time before you start the chain saw. 1. Loosen bar nuts until they are finger tight against the clutch cover. 2. Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail. Adjusting Screw 7
Poulan P3314WSA | User Manual - Page 8
Damaged chain must be repaired or replaced. OPERATION KNOW YOUR CHAIN SAW READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for
Poulan P3314WSA | User Manual - Page 9
gasoline engines. Use of alternative fuels will cause problems such as: improper clutch engagements, overheating, vapor lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the
Poulan P3314WSA | User Manual - Page 10
when the engine runs at idle speed. If the chain moves at idle speed refer to CARBURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns. To stop the engine move the ON/STOP switch to the STOP position. To start the engine hold the saw firmly on
Poulan P3314WSA | User Manual - Page 11
start the chain saw. See CHAIN TENSION in the ASSEMBLY section. S Cut wood only. Do not cut metal, plastics, masonry, non-wood building materials, etc. S Stop the saw if the chain strikes a foreign object. Inspect the saw and repair or replace parts as necessary. If the chain jumps off the guide bar
Poulan P3314WSA | User Manual - Page 12
in the upper branches. S As tree starts to fall, stop saw, put it down, and get away quickly on your planned retreat path. S DO NOT cut down a partially fallen tree with your saw. Be extremely cautious with partially fallen trees that may be poorly supported. When a tree doesn't fall completely, set
Poulan P3314WSA | User Manual - Page 13
start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log. Use a wedge to remove pinched saw Using a log for support 2nd Cut Turn saw OFF and use a plastic or wooden wedge to
Poulan P3314WSA | User Manual - Page 14
as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. S Once a year, replace the spark plug, air filter, and check guide bar and chain for wear. A new spark plug and air filter assures proper air-fuel mixture and helps your engine run
Poulan P3314WSA | User Manual - Page 15
is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw. CHECK FUEL MIXTURE LEVEL S See FUELING ENGINE under the OP- ERATION section. LUBRICATION Bar Oil Fill Cap S See GUIDE BAR AND CHAIN OIL under the OPERATION section
Poulan P3314WSA | User Manual - Page 16
--7Y spark plug and tighten securely with a 3/4 inch Spark Plug REPLACE FUEL FILTER To replace fuel filter, drain your unit by running it dry of fuel. Remove fuel cap and its connected retainer from tank. Pull filter from tank and remove from line. Replace and reassemble. CHAIN ADJUSTMENT See CHAIN
Poulan P3314WSA | User Manual - Page 17
require further assistance or are unsure about performing this procedure, contact your authorized service dealer or call our customer assistance help line at 1--800--554--6723. CARBURETOR ADJUSTMENT WARNING: The chain will be mov- ing during most of this procedure. Wear your protective equipment and
Poulan P3314WSA | User Manual - Page 18
times to distribute oil. S Replace spark plug with new one of recommended type and heat range. S Clean air filter. S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts. S At the beginning of the next season, use only fresh fuel having the proper gasoline
Poulan P3314WSA | User Manual - Page 19
or split fuel line; repair or replace. Engine will not idle properly. Engine will not accelerate, lacks power, or dies under a load. Engine smokes excessively. Chain moves at idle speed. 1. Idle speed requires adjustment. 2. Carburetor requires adjustment. 1. Air filter dirty. 2. Spark plug fouled
Poulan P3314WSA | User Manual - Page 20
and/or attachments not specifically recommended by Poulan for this chain saw. This warranty does not cover tune--up, spark plugs, filters, starter ropes, chain sharpening, bars, chains, and other parts which wear and require replacement with reasonable use during the warranty period. This
Poulan P3314WSA | User Manual - Page 21
of any warranty maintenance or repair on emission related parts will be provided without charge to the owner if the part is under warranty. EMISSION CONTROL WARRANTY PARTS LIST: Carburetor, air filter (covered up to maintenance schedule), ignition system: spark plug (covered up to maintenance