Poulan QCT342 User Manual

Poulan QCT342 Manual

Poulan QCT342 manual content summary:

  • Poulan QCT342 | User Manual - Page 1
    03021 OWNER'S MANUAL Model QCT342 Mfg. ID No. 96072000700 Product No. 960 72 00-07 42 Inch Mower Grass Catcher • Assembly • Operation • Customer Responsibilities • Repair Parts 402337 11.23.05 rad Printed in U.S.A.
  • Poulan QCT342 | User Manual - Page 2
    control of your tractor. objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine
  • Poulan QCT342 | User Manual - Page 3
    . Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center/ department. They have competent, well trained technicians and the proper tools to service or repair this unit. Please read and retain this manual.The instructions will enable you to
  • Poulan QCT342 | User Manual - Page 4
    yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in
  • Poulan QCT342 | User Manual - Page 5
    ASSEMBLY Determine which type drawbar you have on your tractor. Compare the drawbar illustrations below to the drawbar located at the rear of your tractor. Follow the support assembly instructions that apply to your type drawbar. 3. Align support assembly pin with hole in drawbar and hang assembly
  • Poulan QCT342 | User Manual - Page 6
    assembly to tractor. 1. Position cover assembly on ground behind tractor. 2. Lift and rotate cover to align cover brackets with support assembly tubes. 3. Slide cover assembly down onto the support tubes. 3 separate container halves and repeat instructions above. 02097 W DrenlndyoitesAlnyds.
  • Poulan QCT342 | User Manual - Page 7
    upright position. 2. Place slot in lower chute over tab on mower and position lower chute over mower opening as shown. 3. Hook rear latch into flange hole on back of mower. 4. Hook front latch into tab hole on front of mower. • If your tractor is equipped with gauge wheels on the deck, then it will
  • Poulan QCT342 | User Manual - Page 8
    the latches, the deflector shield may try to push the chute away from the mower deck opening. It is important to hold the chute in position while hooking the latches to the mower deck. • If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook
  • Poulan QCT342 | User Manual - Page 9
    5. Secure with rubber latch by hooking hole in latch over latch pin. 7 LEVEL MOWER • Be sure mower is properly leveled for best mower performance. See your tractors owner's manual for instructions COVER UPPER CHUTE FULL BAGGER INDICATOR HANDLE LOWER CHUTE 03029 FIG. 6A ALIGNMENT SLOT LATCH
  • Poulan QCT342 | User Manual - Page 10
    mower operation instructions in your tractor owner's manual. When operating your grass catcher on a lawn where grass and leaf at center supports. j. Close cover and secure latches over center support tubes. Care should be taken not to damage the parts and that the wheel spins freely at the
  • Poulan QCT342 | User Manual - Page 11
    mower blades must be kept sharp. Replace bent or damaged blades. • See BLADE CARE instructions in your tractor owner's manual. CAUTION: BEFORE PERFORMING ANY MAINTENANCE,SERVICE and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components
  • Poulan QCT342 | User Manual - Page 12
    REPAIR PARTS/PIÈCES DE RECHANGE GRASS CATCHER - MODEL QCT342 (MFG. ID 96072000700) / RAMASSE-HERBE - MODÈLE QCT342 (MFG. ID 96072000700) PRODUCT NO. 960 72 00-07 / NUMÈRO DE PRODUIT 960 72 00-07 12 36 csDruoaWbjcnkeAoecttdRtooopNreIrwdaeaNtaermGaamgnoedwd.dereUtiusenerlieoosrnlsatyicoaonrn.
  • Poulan QCT342 | User Manual - Page 13
    MODEL QCT342 (MFG. ID 96072000700) / RAMASSE-HERBE - MODÈLE QCT342 (MFG. ID 96072000700) PRODUCT NO. 960 72 00-07 / NUMÈRO DE PRODUIT 960 72 00-07 KEY NO. PART , Retainer Ressort de retenue Support Assembly Ensemble du support Shoulder Bolt,Self Tapping Boulon Manual Manuel de propriétaire 13
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Assembly
Operation
Customer Responsibilities
Repair Parts
402337
11.23.05
rad
Printed in U.S.A.
OWNER’S MANUAL
Model QCT342
Mfg. ID No. 96072000700
Product No. 960 72 00-07
42 Inch Mower
Grass Catcher
03021