ProForm 10.8x Bike English Manual - Page 10

10. While another person holds the Upright (13) near the Frame (1), connect the Upper Wire Harness (36) to the Lower Wire Harness (8). Tip: Avoid pinching the Wire Harnesses (8, 36). Slide the Upright (13) onto the Frame (1). Attach the Upright with three M8 x 25mm Button Screws (33) and three M8 Split Washers (59). 10 33 59 13 33 59 36 8 1 Avoid pinching the Wire Harnesses (8, 36) 11. Identify the Left Pedal (24), which is marked with a "Left" sticker. 11 Firmly tighten the Left Pedal (24) counterclockwise into the left arm of the Crank (31). 31 Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (31). Strap Adjust the strap on the Left Pedal (24) to the desired position, and press the end of the strap onto the tab on the Left Pedal. Adjust the strap on the Right (not shown) in the same way. 24 Tab 12. Make sure that all parts are properly tightened before you use the exercise bike. Note: Some hardware may be left over after assembly is completed. Place a mat beneath the exercise bike to protect the floor. 10