ProForm 10.8x Bike English Manual - Page 8

6. Have another person hold the Seat Frame (7) under 6 the Rear Frame (2) as shown. Attach the Seat Frame and the Seat (12) to the Rear Frame with four M6 x 42mm Button Screws (49) and four M6 Washers (55). See step 4. Tighten the two M8 x 70mm Button Bolts (54). See step 5. Tighten the four M6 x 38mm Patch Screws (48). 12 2 55 49 7 55 49 55 7. The Console (16) can use four 1.5V "D" batteries (not included); alkaline batteries are recommended. 7 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console dis- plays or other electronic components. Remove the battery cover and insert the batteries into the battery compartment. Make sure to orient the bat- teries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. To purchase an optional power adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Battery Cover Batteries 16 8