ProForm 10.8x Bike English Manual - Page 9
Bar 65 onto the Upright 13. Attach the Left Pulse
View all ProForm 10.8x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Identify the Left Pulse Bar (65), which is marked with a "Left" sticker. Have another person hold the Left Pulse Bar (65) near the left side of the Upright (13). Make sure that the hexagonal holes are in the indicated location. Insert the left Pulse Wire (71) into the Upright (13) and pull it upward out of the top of the Upright. Tip: Avoid pinching the wires. Slide the Left Pulse Bar (65) onto the Upright (13). Attach the Left Pulse Bar with two M6 x 38mm Button Bolts (69) and two M6 Locknuts (27). Make sure that the Locknuts are in the hexagonal holes. Repeat this step for the Right Pulse Bar (66). 8 Avoid pinching the wires 71 69 71 36 66 13 Hexagonal 65 Holes 27 9. While another person holds the Console (16) near the Upright (13), connect the console wire to the Upper Wire Harness (36). Then, connect the console pulse wires to the Pulse Wires (71). Insert the excess wire downward into the Upright. Tip: Avoid pinching the wires. Attach the Console (16) to the Upright (13) with four M4 x 16mm Screws (52). 9 52 16 Console Wire 36 Pulse Wires 71 13 Avoid pinching the wires 9