ProForm 415 Lt Treadmill English Manual - Page 12

11. Slide the Right Upright Cover (89) up against the Right Handrail (64). Attach the Right Upright 11 Cover with two M4.2 x 16mm Screws (56). Be careful not to overtighten the Screws. Attach the Left Upright Cover (not shown) as described above.  See steps 4 and 5. Tighten the six 3/8" x 3 1/4" Screws (2). 64 89 56 12. Attach the Latch Housing (67) to the Left Upright (66) with two #10 x 1/2" Screws (86); make 12 sure that the knob is on the indicated side. Start both Screws, and then tighten them. Be careful not to overtighten the Screws. Knob 86 67 66 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). 12