ProForm 475 E Elliptical English Manual - Page 12

Main Wire Harness 32 and to the Pulse Wire

Get ProForm 475 E Elliptical PDF manuals and user guides View all ProForm 475 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

13. Remove and discard the wire tie on the Main Wire Harness (32). Have a second person hold the Console (30) near the Upright (2). Connect the wires on the Console (30) to the Main Wire Harness (32) and to the Pulse Wire Harness (31). Insert the excess wire into the Upright (2). Tip: Avoid pinching the wires. Attach the Console (30) to the Upright (2) with four M4 x 16mm Screws (56). See step 5. Tighten the M10 x 53mm Screw (73), the M10 x 20mm Screw (74), and the M10 x 60mm Bolt (72). See step 7. Tighten the M8 x 38mm Bolts (59). 13 30 Avoid pinching the wires 31 32 2 56 14. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
12
13. Remove and discard the wire tie on the Main
Wire Harness (32).
Have a second person hold the Console (30)
near the Upright (2).
Connect the wires on the Console (30) to the
Main Wire Harness (32) and to the Pulse Wire
Harness (31).
Insert the excess wire into the Upright (2).
Tip: Avoid pinching the wires.
Attach the
Console (30) to the Upright (2) with four M4 x
16mm Screws (56).
See step 5.
Tighten the M10 x 53mm Screw
(73), the M10 x 20mm Screw (74), and the M10
x 60mm Bolt (72).
See step 7.
Tighten the M8 x 38mm Bolts (59).
2
56
31
30
32
13
14.
Make sure that all parts are properly tightened before you use the elliptical.
Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
Avoid pinching
the wires