ProForm 475 E Elliptical English Manual - Page 7
Tip: Secure the Main Wire Harness 32 to
View all ProForm 475 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. With the help of a second person, place some of 3 the packing materials (not shown) under the rear of the Frame (1). Attach the Track (11) to the Frame (1) with four M10 x 20mm Screws (74), two M10 x 39mm Screws (75), and six M10 Washers (64) as shown; start all six Screws, and then tighten them. Remove the packing materials from under the Frame (1). 74 64 1 74 11 74 64 75 4. Have a second person hold the Upright (2) near 4 the Frame (1). Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Main Wire Harness (32). Then, pull the upper end of the wire tie until the Main Wire Harness is routed through the Upright. Tip: Secure the Main Wire Harness (32) to the Upright (2) with the wire tie to prevent it from falling into the Upright. Wire Tie 2 Wire Tie 32 1 7