ProForm 500 F Elliptical English Manual - Page 5

PART IDENTIFICATION CHART See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the parts bag, check to see if it has been preattached. M10 Washer (30) M4 x 15mm Screw (20) M8 x 15mm Screw (19) M8 Washer (27) M6 x 25mm Screw (21) M10 x 180mm Bolt (23) M6 Washer (28) M10 Nylon Locknut (2) M8 x 40mm Bolt (25) M6 x 45mm Screw (22) M6 x 60mm Screw (24) M8 Nylon Locknut (29) M8 x 70mm Carriage Bolt (26) 5