ProForm 500 F Elliptical English Manual - Page 7
Attach the Front Stabilizer 3 to the Frame 1
 |
View all ProForm 500 F Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Attach the Frame (1) to the Base (4) with the two 2 M8 x 70mm Carriage Bolts (26) and two M8 Nylon Locknuts (29). Do not tighten the Nylon Locknuts yet. 29 1 26 4 3. Attach the Front Stabilizer (3) to the Frame (1) 3 with four M8 x 15mm Screws (19). See step 2 and tighten the M8 Nylon 1 Locknuts (29). 3 19 19 4. Orient the Backrest Tubes (9) so that the indicated holes are closer to the top of the Backrest Tubes. Attach the Backrest Bracket (8) to the Backrest Tubes (9) with four M8 x 40mm Bolts (25), four M8 Washers (27), and four M8 Nylon Locknuts (29). Do not tighten the Nylon Locknuts yet. 4 9 25 27 27 29 8 29 Holes 9 27 27 25 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
7
2
1
29
4
26
3
4
3
1
9
Holes
9
8
25
27
27
27
27
29
29
25
19
19
2.
Attach the Frame (1) to the Base (4) with the two
M8 x 70mm Carriage Bolts (26) and two M8
Nylon Locknuts (29).
Do not tighten the Nylon
Locknuts yet.
3.
Attach the Front Stabilizer (3) to the Frame (1)
with four M8 x 15mm Screws (19).
See step 2 and tighten the M8 Nylon
Locknuts (29).
4.
Orient the Backrest Tubes (9) so that the indicat-
ed holes are closer to the top of the Backrest
Tubes.
Attach the Backrest Bracket (8) to the Backrest
Tubes (9) with four M8 x 40mm Bolts (25), four
M8 Washers (27), and four M8 Nylon
Locknuts (29).
Do not tighten the Nylon
Locknuts yet.