ProForm 505 Cst Treadmill English Manual - Page 10
Note: The #10 Star Washers are slightly - assembly
View all ProForm 505 Cst Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
9. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the two #8 x 3/4" Screws (1). Next, lift off the Crossbar (107). 9 Console Assembly 1 107 10. IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (2). Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four #10 Star Washers (12); do not fully tighten the Screws yet. Note: The #10 Star Washers are slightly smaller than the 1/4" Star Washers (109). Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Patch Bolts (9) and four 1/4" Star Washers (109); do not tighten the Patch Bolts yet. Be careful not to pinch the Upright Wire (87). Tighten one #10 x 3/4" Screw (2) in each end of the Crossbar (107); do not overtighten the Screws. Then, tighten the other #10 x 3/4" Screw (2) in each end of the Crossbar. Tighten the four 1/4" x 1" Patch Bolts (9). 10 First 102 2 9 109 12 82 107 First 2 9 109 12 87 83 10