ProForm 585 Cs Treadmill English Manual - Page 9

7. Press a Front Handrail Endcap (97) into the Left Handrail (33). Attach the Front Handrail Endcap 7 with a #8 x 3/4" Endcap Screw (16). Slide the Left Handrail Spacer (47) onto the Left Upright (74). Align the large holes in the Left Handrail Spacer with the large holes in the Left Upright. Set the Left Handrail (33) on the Left Handrail Spacer. Attach the Left Handrail (33) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Tighten two #8 x 3/4" Screws (12) into the Left Handrail Spacer (47). 97 16 33 47 74 9 12 7 8. Hold the Right Handrail (34) near the Right Upright (78). Insert the Upright Wire (38) through the Right Handrail Spacer (60), into the hole in the bottom of the Right Handrail, and out of the large hole in the side of the Right Handrail. See the inset drawing. Insert the included plastic tie through the holes in the Right Handrail (34) as shown. Look inside the Right Handrail. Make sure that the plastic tie holds the Upright Wire (38) to the side as shown in the inset drawing. Then, tighten the plastic tie. Press a Front Handrail Endcap (97) into the Right Handrail (34). Attach the Front Handrail Endcap with a #8 x 3/4" Endcap Screw (16). Attach the Right Handrail (34) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Tighten two #8 x 3/4" Screws (12) into the Right Handrail Spacer (60). 9. Attach the Pulse Bar Bottom (95) to the Left Handrail (33) and the Right Handrail (34) with two #10 x 3/4" Screws (5) and two #10 Star Washers (27). Remove the long tie from the Upright Wire (38). 8 97 Large 16 Hole 38 79 34 12 60 Hole 34 Tie 38 78 60 Hole 9 33 27 5 Long Tie 95 5 38 27 34 9