ProForm 615 Treadmill User Manual

ProForm 615 Treadmill Manual

ProForm 615 Treadmill manual content summary:

  • ProForm 615 Treadmill | User Manual - Page 1
    information: ¥ The MODEL NUMBER OF THE PRODUCT (PETL61591) ¥ The NAME OF THE PRODUCT (PROFORM¨ 615 treadmill) ¥ The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual) ¥ The KEY NUMBER OF THE PART(S) (see the PART LIST on page 23 and the EXPLODED DRAWING attached in the centre of this
  • ProForm 615 Treadmill | User Manual - Page 2
    TREADMILL 19 TROUBLE-SHOOTING 20 CONDITIONING GUIDELINES 22 PART LIST 23 HOW TO ORDER REPLACEMENT PARTS Back Cover Note: An EXPLODED DRAWING is attached in the centre of this manual treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill 1 Walking Belt 107
  • ProForm 615 Treadmill | User Manual - Page 3
    procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative. Servicing other than the procedures in this manual should be performed by an authorised service representative only. 28. The treadmill is intended for in-home
  • ProForm 615 Treadmill | User Manual - Page 4
    the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. b 5Ð7 cm Rear Roller Adjustment Bolts c. If the walking belt still slows when walked on, please call our Customer Service Department. PROBLEM: The walking belt is off-centre SOLUTION: a. If
  • ProForm 615 Treadmill | User Manual - Page 5
    be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the PROFORM¨ 615 treadmill. If you have additional questions, please call our our Customer Service Department at 0345-089009. To help us assist you, please note the
  • ProForm 615 Treadmill | User Manual - Page 6
    materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the
  • ProForm 615 Treadmill | User Manual - Page 7
    instructions at the right and turn off the demo mode. When you are finished using the treadmill Service Department (see the back cover of this manual parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt
  • ProForm 615 Treadmill | User Manual - Page 8
    WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt internet service provider manual mode will
  • ProForm 615 Treadmill | User Manual - Page 9
    will begin guiding you through your workout. Simply follow your personal trainerÕs instructions. Note: If the TIME/INCLINE/SEG TIME display is flashing, press the START button or the SPEED v button on the console. The treadmill will not respond to a CD or video program whilst the TIME/INCLINE
  • ProForm 615 Treadmill | User Manual - Page 10
    a variety of PROFORM treadmills. Some instructions may not apply to this treadmill. 1 Insert the key fully into the console. When the key is inserted, the four displays and various indicators on the console will light. 2 Press the PROGRAM button. When the key is inserted, the manual mode will be
  • ProForm 615 Treadmill | User Manual - Page 11
    cable into the jack on the front of the treadmill near the power cord. Plug the other end MILE displayÑThis display shows the speed of the walking belt and your current pace (pace is measured in reinsert the key. Note: For simplicity, all instructions in this manual refer to miles. Note: To reset the
  • ProForm 615 Treadmill | User Manual - Page 12
    to zero. The walking belt will then slow to a stop. If the speed or incline setting for the current segment is too high or too low, you can manually override the settings by pressing the SPEED or INCLINE buttons on the console. However, when the next segment begins, the treadmill will adjust to the
  • ProForm 615 Treadmill | User Manual - Page 13
    128 101 47 64 47 67 63 120 62 59 61 60 54 62 53 SAVE THE EXPLODED DRAWING FOR FUTURE REFERENCE. To identify the parts shown on this exploded drawing, refer to the PART LIST on page 23 of the USERÕS MANUAL.
  • ProForm 615 Treadmill | User Manual - Page 14
    EXPLODED DRAWINGÑModel No. PETL61591 R1000A 87 117 90 121** 129** 130** 110 47 103 28* 104 97 101 107 108 101 124 79 124 85 102 82 101 112 113 111 115 114 109 110 83 86 95 15 20 97 76 96 97 101 119 47 69 34 99 105 72 28* 103 104 97 101 50 77 117 89 89 79 108 107 101 15
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

USER’S MANUAL
¤
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
Model No. PETL61591
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Part No. 163278 R1000A
Printed in USA ' 2000 ICON Health & Fitness, Inc.
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Patent Pending
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.
Please CALL:
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness Ltd. office, or write:
ICON Health & Fitness Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
Tel: Country Code: 0345-089009
Fax: 0113-2411120
When ordering parts, please be prepared to give the following information:
¥
The MODEL NUMBER OF THE PRODUCT (PETL61591)
¥
The NAME OF THE PRODUCT (PROFORM
¤
615 treadmill)
¥
The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
¥
The KEY NUMBER OF THE PART(S) (see the PART LIST on page 23 and the EXPLODED DRAWING attached
in the centre of this manual)
¥
The DESCRIPTION OF THE PART(S) (see the PART LIST on page 23 and the EXPLODED DRAWING attached
in the centre of this manual).
PROFORM
¤
is a registered trademark of ICON Health & Fitness, Inc.
0345-089009