ProForm 700 Lt Treadmill English Manual - Page 9

2. Make sure that the power cord is unplugged. Locate the Upright Wire (70) bundled around the front of the Base (80). Cut the plastic tie securing the Upright Wire. Route the Upright Wire out of the indicated hole. Press a Base Cap (77) into each side of the Base (80). See the inset drawing. Cut the plastic tie near the Upright Wire (70). Be careful not to damage the Upright Wire. 2 80 Cut 77 Hole 70 Tie Cut 70 3. Identify the Left Upright (75). Have a second person hold the Left Upright near the Base (80). 3 See the inset drawing. Tie the wire tie in the Left Upright (75) securely around the end of the Upright Wire (70). Then, insert the Upright Wire into the lower end of the Left Upright as you pull the other end of the wire tie through the Left Upright. 70 Wire Tie 75 75 Wire Tie 70 80 9