ProForm Fusion 6.0 Lx English Manual - Page 11

15. Attach the Center Top Frame (6) to the Right and Left Top Frames (3, 4) with four M10 x 70mm Bolts (57), four M10 Washers (109), and two M10 Nylon Locknuts (111). Do not tighten the Bolts yet. Attach a Weight Guide (30) inside the Center Top Frame (6) with an M10 x 65mm Bolt (110), two M10 Washers (109), a 1/2" Spacer (68), and an M10 Nylon Locknut (111). Attach the other three Weight Guides (30) to the Center Top Frame (6) in the same manner. Tighten the bolts, screws and locknuts used in steps 4, 5, 8, 10, 11, and 12. 15 111 6 57 109 3 30 111 109 68 109 57 110 109 4 30 Arm Assembly 16 16. Apply grease to 2" Bushing (63). Attach the Leg Lever (15) and the 2" Bushing to the Curl Post Upright (10) with an M10 x 70mm Bolt (57) and an M10 Nylon Locknut (111). 111 15 63 Grease 10 57 17. Apply grease to a 3" Bushing (71) and the two 17 Large Round Bushings (61) in the Right Butterfly Arm (23). Attach the Butterfly Arm and 3" Bushing to the Butterfly Frame (24) with an M10 x 100mm Bolt (85) and an M10 Nylon Locknut (111). 85 61 Grease Repeat this step with the Left Butterfly Arm (22). 23 61 71 Grease 22 111 24 91 11