ProForm Fusion 6.0 Lx English Manual - Page 13
Cable Assembly
View all ProForm Fusion 6.0 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
22. Apply grease to an M10 x 70mm Bolt (57). Attach 22 a Press Arm Handle (27) to the Left Press Arm (25) with the Bolt and an M10 Nylon Locknut (111). Do not overtighten the Locknut; the Press Arm Handle must be able to pivot easily. Repeat this step with the other Press Arm Handle (27) and the Right Press Arm (26). 23. Apply grease to a 2 3/4" Bushing (65). Attach the 23 Leg Press (12) and the 2 3/4" Bushing to the Left Base (2) with an M10 x 95mm Bolt (108) and an M10 Nylon Locknut (111). 24. Apply grease to an M10 x 75mm Bolt (96). Attach 24 the Leg Press Plate (29) and a 2 3/4" Bushing (65) to the Leg Press (12) with the Bolt and an M10 Nylon Locknut (111). Do not overtighten the Locknut; the Leg Press Plate must be able to pivot easily. 111 57 27 Grease 25 27 26 12 2 111 108 65 Grease 111 96 Grease 12 29 Cable Assembly 25 92 25. During steps 25-54, refer to the CABLE DIA- 73 GRAMS on pages 27 and 28 to identify the cables and ensure proper cable routing. 7 101 Locate the Butterfly Cable (73). Attach the Cable to the Right Upright (7) with an M8 x 25mm Shoulder Bolt (92) and an M8 Nylon Locknut (101). Make sure that the Cable end can pivot easily around the shoulder of the Bolt. 13