ProForm Fusion 6.0 Lx English Manual - Page 14
Left Butterfly Arm 22 with an M10 x 50mm Bolt
View all ProForm Fusion 6.0 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
26. Wrap the Butterfly Cable (73) around a Pulley 26 (43). Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Finger Guards (45) to the Left Butterfly Arm (22) with an M10 x 50mm Bolt (106) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 27. Wrap the Butterfly Cable (73) around a Pulley 27 (43). Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Half Finger Guards (46) to the Right Upright (7) with an M10 x 120mm Bolt (97) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 111 45 43 106 48 73 109 45 22 111 46 43 48 73 109 46 7 28. Wrap the Butterfly Cable (73) around a Pulley 28 (43). Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Finger Guards (45) to the Right Butterfly Arm (23) with an M10 x 50mm Bolt (106) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 109 97 111 48 45 43 73 109 45 23 29. Wrap the Butterfly Cable (73) under the "V"-pulley 29 (44). Attach the "V"-pulley, the Long Cable Trap (83), an M10 Washer (109), and two Finger Guards (45) to the Right Upright (7) with an M10 x 150mm Bolt (94) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is orient- ed to hold the Cable in the groove of the "V"- pulley. 106 111 44 73 45 45 83 109 7 94 14