ProForm Fusion 6.0 Lx English Manual - Page 20
Seat Assembly
View all ProForm Fusion 6.0 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
53. Wrap the Press Cable (72) under a Pulley (43). 53 Attach the Pulley, a Cable Trap (48), an M10 Washer (109), and two Half Finger Guards (46) to the Left Base (2) with an M10 x 130mm Bolt (107) and an M10 Nylon Locknut (111). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 46 48 109 111 107 43 46 72 2 54. Attach the Press Cable (72) to the Small Pulley 54 Plate (50) with an M6 Washer (114) and an M6 Nylon Locknut (103). See the inset drawing. Do not completely tighten the Locknut; it should be tightened so that only two threads of the Cable show past the Locknut. 103 114 50 72 Seat Assembly 55 55. Attach the Curl Pad (38) to the Curl Post (16) with two M6 x 25mm Screws (99). 38 50 103 72 16 56. Attach a Backrest (35) to the Right Upright (7) with four M6 x 25mm Screws (99). 56 99 99 35 20 99 7