ProForm Space Saver 500 Treadmill English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split Washer (90)-3 M8 x 16mm Washer (110)-2 M8 Washer (88)-4 M8 x 23mm x 1mm Washer (112)-2 22mm x 16mm Wave Washer (111)-2 M4 x 16mm Round Head Screw (101)-14 M6 x 10mm Button Screw (104)-8 M8 Nylon Locknut, Bright (79)-1 M8 Nylon Locknut (78)-2 23mm x 19mm Wave Washer (97)-2 M8 x 15mm Button Screw (116)-8 Hub Screw (87)-8 M8 x 23mm Button Screw (84)-4 M8 x 38mm Button Screw (124)-6 M8 x 69mm Button Bolt (80)-1 M10 x 82mm Button Screw (82)-2 M10 x 127mm Button Screw (83)-2 M8 x 23mm Shoulder Screw (115)-2 M10 x 58mm Shoulder Bolt (71)-2 5