ProForm Space Saver 500 Treadmill English Manual - Page 6
Next, hold the Left and Right Stabilizer Covers
View all ProForm Space Saver 500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin assembling the elliptical exerciser. While another person lifts the Base (1), attach the Front Stabilizer (6) to the Base with two M10 x 82mm Button Screws (82). Next, hold the Left and Right Stabilizer Covers (118, 119) around the Base (1). Attach the Stabilizer Covers with six M4 x 16mm Round Head Screws (101) (only three are shown). 118 1 6 82 119 101 2. Remove the indicated screw and bracket from the Base (1). Discard the screw and the 2 bracket. Next, turn the Base Foot (26) into the Base (1) as far as possible. Bracket 3. Attach the Rear Stabilizer (7) to the Frame (2) 3 with two M10 x 127mm Button Screws (83). Next, hold the handle on the Frame (2), press the Latch Button (68), and lower the Frame until the Rear Stabilizer (7) is resting on the floor. 2 68 1 26 Screw 83 7 Handle 6