Pyle PBTR30 User Guide

Mini Stereo Bluetooth Receiver

Getting started

1. Charging the receiver

PBTR30 comes with a built-in rechargeable battery, prior to using it, it is

highly recommended to charge the battery fully for the first time.

The LED flashes red when the receiver is low power. Please recharge the

receiver.

The LED keeps red while charging. It takes about 2-3 hours for a full charge.

When the charging is completed, LED will turn off.

2. Turning on/off the receiver

3. Pairing with Bluetooth devices

1) How to enter into pairing mode

Remark: The pairing mode will last 2 minutes, the receiver PBTR30 will

switch to standby mode automatically if no devices connected within

2 minutes.

2) Pairing with mobile phones

Ensure your mobile phone supports A2DP profile. The pairing procedure

varies with different models of mobile phones. Please refer to the user guide

of your mobile phone for further information. The general pairing

procedures are as follows:

- Place PBTR30 and your mobile phone where they are easily viewable and

no more than 1 meter.

- Set the receiver into pairing mode (please refer to “How to enter pairing

mode”).

- Activate your mobile phones’ Bluetooth function, then search for Bluetooth

devices within range, select “PBTR30” from the list of devices shown. And

they will be connected automatically.

- After connected successfully, the LED flashes blue once every 3 seconds.

Remarks:

- If no device connected with PBTR30 within 5 minutes, the receiver will turn

off automatically in order to save power.

- After successful pairing, the receiver and the mobile phone will remember

each other, they will no need to re-pair next time.

- Every time the receiver is turned on, it will automatically connect to last

connected device. If you want to pair it with other devices, please turn off

the Bluetooth function of last connected devices first and pair the receiver

with the new device according to the pairing procedures above.

- When the receiver is turned on and doesn’t connect to any devices, press

button (1) twice, it will automatically connect to the last connected device.

- When the receiver and the mobile phone are out of effective range to

disconnected, they will connect to each other automatically once going

back to effective range.

- If pairing still fails after several tries, please refer to the Bluetooth

transmitter’s user’s manual for further information.

4)

Music play back

Remarks:

- The music will automatically pause when you dial a phone number or

there is an incoming call.

- PBTR30 has a built-in microphone, it can support answering phone calls

if it connected to a headphone or speaker. The music will automatically

play when the call is ended.

5)

LED indicator

Specifications :

1) Bluetooth version: Bluetooth V3.0

2) Working range: 10 meters

3) Dimension: 54*25*11mm

4) Standby Time: 144-192 Hours

5) Working time:

4~6 hours

6) Charging time: 2-3 hours

7) Weight: 8g

1) MFB button — Power on/off, pair, music pause/play

2) Charging jack — DC 5V

3) LED indicator — Indicate current status

4) 3.5mm audio in plug — Connect to audio device

Required systems

- Audio device with 3.5mm audio in jack, such as speakers, radios etc .

- Bluetooth transmitting device supporting A2DP profile, such as iPhones,

iPads, Bluetooth mobile phones, Bluetooth MP3s etc.

FAQs

1. What to do when PBTR30 can’t be turned on?

Please charge the PBTR30.

2. What to do when PBTR30 can’t pair and connect to a Bluetooth device?

Make sure the Bluetooth device is placed within 1 meter;

Ensure PBTR30 has entered pairing mode.

Care and maintenance

Read the following recommendations before using the receiver.

- Don’t expose the receiver to liquid, moisture or humidity to avoid

the product’s internal circuit being affected.

- Don’t use abrasive cleaning solvents to clean the receiver.

- Don’t expose the receiver to extremely high or low temperature as

this will shorten the life of electronic devices, destroy the battery or

distort certain plastic parts.

-

Don’t dispose of the receiver in a fire as it will result in an explosion.

- Don’t bring the receiver into contact with sharp objects as this will

cause scratches and damages.

- Don’t let the receiver fall down onto the floor. The internal circuit

might get damaged.

- Don’t attempt to disassemble the receiver as it may get damaged if

you are not professional.

- If you do not plan to use the receiver for a long time, please store it

in a dry place that is free from extreme temperatures and dust.

- Don’t attempt to take out the battery from the receiver, as this might

damage it.

In case the receiver doesn’t function properly, send it to the store you

bought it. The staff will help you to solve the problem.

www.PyleAudio.com

Thank you for choosing our Bluetooth stereo receiver PBTR30.

Please read this user manual carefully before use.

PBTR30 is a mini stereo Bluetooth receiver, used for streaming music from

your audio devices. PBTR30 can be compatible with any audio devices with

3.5mm port, which has Bluetooth function, such as iPhone, iPod, mobile

phones, computers, and so on.

With microphone built inside, it can be used for answering phone calls

if it connected to a headphone or speaker.

The product comes with a built-in rechargeable battery, it can be used

for about 6 hours after being charged fully.

Bluetooth Receiver PBTR30 Overview

PBTR30 User Manual

Page1

Page2

Page3

Page4

Page5

Page6

Page7

Pyle PBTR30 User Guide

Pyle PBTR30 Manual

Pyle PBTR30 manual content summary: