Pyle PCT60 User Guide

Pyle PCT60 Manual

Add to My Manuals
Save this manual to your list of manuals

Pyle PCT60 | User Guide - Page 1
PCT60 Pro Cable Tester Congartulations! The PCT60 accepts a wide range of cable types used in variety of A/V applications such as XLR (3 and 5-pin), 1/4" and 1/8" TS, TRS, and TT plugs as well as RCA, MIDI, Speakon (8-P, 4-P), Din 4-P, RJ45,
Pyle PCT60 | User Guide - Page 2
correct polarity. 5. Reattach battery cover plate, insert screw and turn clockwise to tighten. Testing cables 1. Move the On switch to Cable Tester. 2. To test pins 1-3, you may adjust the Switch 1-3 selector to SW1. For cables with more than three pins, you may adjust the selector to SW2 for pins
Pyle PCT60 | User Guide - Page 3
Mode, Press and hold the Reset button while Switching from off to Cable Tester. The On LED light will on and off to indicate that you are in Installed Cable Tester Mode. 2. Insert a cable into the one of the outputs. 3. The LED grid will now show any short circuits, if any by indicating which
Pyle PCT60 | User Guide - Page 4
and battery connection. Due to the Duracell and Energizer battery cell size, the PCT60 battery comparment must be delicately adjusted to secure battery placement. For further information regarding this issue, or for technical support, please contact our customer service line at (718) 535-1800. 4

Match case Limit results 1 per page

PCT60 Pro Cable Tester

Congartulations!

The PCT60 accepts a wide range of cable types used in variety of A/V applications

such as XLR (3 and 5-pin), 1/4” and 1/8” TS, TRS, and TT plugs as well as RCA,

MIDI, Speakon (8-P, 4-P), Din 4-P, RJ45, and USB. Choose to either test continuity or

send out test tones. Output level is adjustable between +4dBu pro line level, -10dBV

consumer line level, and -50 mic level. The PCT60 can check for continuity, intermit-

tency, phantom power, and the presence of grounded shields. The unit runs off two

AA 1.5V batteries makin

g it easy to carry around whether working in the ﬁeld or at

home.