Pyle PDICBT57 Instruction Manual
Pyle PDICBT57 Manual
 |
View all Pyle PDICBT57 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PDICBT57 manual content summary:
- Pyle PDICBT57 | Instruction Manual - Page 1
PDICBT57- Dual 5.25" Speakers PDICBT67- Dual 6.5" Speakers PDICBT87- Dual 8.0" Speakers Wireless BT Streaming Wall / Ceiling Speaker System - Pyle PDICBT57 | Instruction Manual - Page 2
the most realistic soundstage possible. These recommendations are for the optimum placement of the loud speakers. Use these placement recommendations as a guide. Slight variations will not diminish your listening pleasure.The front speakers should be placed the same distance from each other as they - Pyle PDICBT57 | Instruction Manual - Page 3
Speaker Power Supply Connection: The active speaker features the power supply for the speaker system. You may choose to use the included power supply adapter to connect directly into the active speaker's power supply input. *Optional power supply connection can be made by directly 'hard-wiring' - Pyle PDICBT57 | Instruction Manual - Page 4
Speaker Connection (Active-to-Passive) Create the daisy-chain style speaker connection to allow speaker-tospeaker audio communication output. The included speaker wire is used to connect the active speaker to the passive speaker. Ensure proper speaker connection wiring between the speakers. Passive - Pyle PDICBT57 | Instruction Manual - Page 5
Wireless BT Pairing Once the speakers are installed and powered -- search the Wireless BT network name " Pyle USA" on your device. Ensure the Wireless BT Receiver. If you are prompted for a password, enter '0000' (4 zeros). Passive Speaker Wireless BT Receiver Switch for PDICBT57 For PDICBT57 model - Pyle PDICBT57 | Instruction Manual - Page 6
INSTALLATION TOOLS NEEDED The in-wall/in-ceiling speakers were designed to be easily installed. However, if you are unsure of your ability to properly install these loud speakers please contact your dealer or a quali ed installer. Pencil Phillips #2 screwdriver Measuring tape Utility knife - Pyle PDICBT57 | Instruction Manual - Page 7
secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grill. 4. Replace the metal grill. 5. Complete TROUBLESHOOTING IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS: • Check that receiver/amplifier is on and a source is playing. • Check all wires and - Pyle PDICBT57 | Instruction Manual - Page 8
no subwoofer is being used, make sure the left and right front and rear speakers have been configured as "LARGE" See your receiver/processor's owner's manual for futher information on correct speaker con guration in Dolby Digital, DTS and other surround sound modes. IF THE SYSTEM PLAYS AT LOW VOLUME - Pyle PDICBT57 | Instruction Manual - Page 9
Features: • Includes (2) Speakers (Active + Passive) • Wireless BT Music Streaming Ability • 2-Way Full Range Stereo Sound • Built-in Digital Sound Ampli er • Mounts Flush to Walls or Ceilings • Screw Terminal Block Speaker Connectors • Ability to Daisy-Chain Speakers for Stereo System Sound • - Pyle PDICBT57 | Instruction Manual - Page 10
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected]
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Wireless BT Streaming
Wall / Ceiling Speaker System
PDICBT57-
Dual 5.25" Speakers
PDICBT67-
Dual 6.5"
Speakers
PDICBT87-
Dual 8.0"
Speakers