Pyle PDMIC59 Instruction Manual

www.PyleUSA.com

Handling & Precautions

Covering and/or obstructing the microphone top mesh grill and internal mic receiver diaphragm element will

result in less than optimal performance, causing audio distortion and interfered sound signal.

To avoid such audio interferences try decreasing the audio source's volume, than position the microphone

diaphragm so that it is not directly pointed or exposed to the external audio source; allow sufficient separation

distance between the microphone and external audio source. The microphone internal system contains sensitive

audio equipment and electronic components, do not drip, hit or expose to forceful impact.

Do not store or operate the microphone in a high temperature, or high humidity, environment.

Operation & Performance

The optimum placement distance of the microphone and vocals (distance from your mouth to the microphone grill)

is from 5 to 10 centimers. If the microphone placement is too close to your mouth, the sound and audio pickup

performance may be unclear, outputting excessive bass and distortion in the audio tone.

Microphone Connection

Align the output connector with the slotted insert of the incoming connection cable -- ensure the connector

alignment is positioned properly and adequate pressure is used when inserting the connection (you may hear a

"click" sound to ensure proper connection). To unplug the microphone, hold down the button lab, and ensure it is

depressed, then pull the connection cable outward gently.