Pyle PDWR69BTW Instruction Manual
Pyle PDWR69BTW Manual
 |
View all Pyle PDWR69BTW manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PDWR69BTW manual content summary:
- Pyle PDWR69BTW | Instruction Manual - Page 1
the first time, restart all the equipment and then follow the above instructions. • If you are unable to reconnect a previously connected device, remove ? We are here to help! Phone: (1) 718-535-1800 Email: [email protected] www.PyleUSA.com www.PyleUSA.com PDWR69BTB - PDWR69BTW 6.5'' Pro Active - Pyle PDWR69BTW | Instruction Manual - Page 2
• Please read the instructions carefully before installation and use. Keep the manual safe for future reference. • Prior to installing the speakers into any wall, check the structure for weight bearing ability and avoid contact with any wiring
-
1 -
2
 |
 |
www.PyleUSA.com
www.PyleUSA.com
Wall Mountable, 100 Watts MAX
with 2-Way Full Range Stereo
Sound Reproduction, Pair
PDWR69BTB - PDWR69BTW
6.5'' Pro Active Wireless BT
Streaming Speakers
Questions? Issues?
We are here to help!
Phone:
(1) 718-535-1800
Email:
Note:
Anytime you note distortion, reduce the volume to a lower setting. Never
allow your amplifier to be driven into "
clipping
". Otherwise the speakers
may be damaged. Damage caused by operating the speakers at distorted
volume levels is not covered by the warranty.
WIRELESS BT PAIRING
Ensure the speaker is connected to the power supply and turned on.
Any BT device (such as phones, tablets, laptops etc.) is available for pairing.
Note:
• There will be a prompt sound when BT is connected/disconnected.
• BT Input has the priority when BT input and RCA input are connected
simultaneously. To listen to RCA input audio, disconnect from BT before
using a RCA input
device.
• One device can only connects or control
one BT speaker at a time.
If device A connects and controls BT, device B cannot search or control the
BT speaker. Device A MUST no longer be connected, then device 8 can
connect and control.
• If pairing fails the first time, restart all the equipment and then follow the
above instructions.
• If you are unable to reconnect a previously connected device, remove the
"
PyleUSA
" from the list of paired devices, and then follow the above
instructions
again.
• The BT connection will be lost if the distance between the speaker and the
BT device exceeds 1Om (32.8 ft.).
PyleUSA
PyleUSA
1. Open the setting
menu and select BT.
2. Turn on BT and
search devices.
3. Click "
PyleUSA
"to
pair with your device.
CARE AND MAINTENANCE
• Turn off the power to the speaker when unused for long periods of time.
• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet
need only occasional dusting/cleaning. Never use chemicals or solvents as
they may damage the surface. Always clean using a dry cloth.
• Never touch the speaker drivers.
Technical Specs:
• Power Supply: 100W (MAX Power)
• RMS Power: 50W (Passive Speaker)
• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter
• Subwoofer Type: 6.5'' Paper Cone
• Tweeter Type: 0.5'' Mylar Dome
• Frequency Response: 70-20 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86dB
• Construction Material: Polypropylene
• Power Cable Length: 3.94 ft.
• Power Output: 100-240V
• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches