Pyle PETW102 Installation Guide
Pyle PETW102 Manual
 |
View all Pyle PETW102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pyle PETW102 manual content summary:
- Pyle PETW102 | Installation Guide - Page 1
Thank you for choosing our products Pyle Audio 1600 63rd st , Brooklyn, NY, 11204 (718)236-8000 -12- Motorized Flat Wall Mount INSTALLATION GUIDE Item No.:PETW102 TV Size Range:14"~42" Total travel: ±25° Max VESA:400X300 Maximum load: 40kg\88lbs Supply voltage: 110-260VAC,50/60Hz www. - Pyle PETW102 | Installation Guide - Page 2
. WARNING: Before turning on the power, make sure all the screws are fixed; bracket and TV screen have been installed correctly according the user's manual. PINCH HAZARD! FINGERS OR HANDS BETWEEN MOVING PARTS CAN LEAD TO SEVERE PERSONAL INJURY! Keep fingers and hands away from mount lift arms when - Pyle PETW102 | Installation Guide - Page 3
to ensure correct installation and acquaintance with this product, we recommend you read this manual carefully before assembly and use. We are not responsible for any personal injury or dimensions. Step 2.Mounting onto the wall. Follow the instructions based upon your mounting surface: -10- -3- - Pyle PETW102 | Installation Guide - Page 4
For Wooden Studs Using the provided Stud Finder to locate studs and mark the outside edges and center locations. Place wall plate on wall as a template. Level plate, and mark the center of the 4 mounting holes. Make sure that the mounting holes are on the stud center lines. Pre-drill the mounting - Pyle PETW102 | Installation Guide - Page 5
is installed balance. If not, then slide the Electromotor Unit let pointer level in the center position. Step 4: Attach bracket to TV Check your TV manual to confirm the diameter of bolt to be used or choose an appropriate bolt according to size, height and position of the holes on your - Pyle PETW102 | Installation Guide - Page 6
For correct installing, make sure that hook of every bracket must facing down. Use selected bolts, spacers and washers for installing bracket at the back of display. Adjust two brackets to equal heights and level. Once aligned, tightly secure the bolts. IMPORTANT: Don't force the bolt into the hole
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
-12-
Important: If don't understand about right install ways,
please consult to normal installing specialist.
Important:
INSTALLATION GUIDE
Item No.:PETW102
Item
No.:PETW102
Motorized Flat Wall Mount
TV Size Range:14
42
"
"
~
Total travel:
25
Max VESA:400X300
Maximum load: 40kg\88lbs
Supply voltage: 110-260VAC,50/60Hz
±
°
Thank you for choosing our products
Thank
you
for
choosing
our
products
www pyleaudio com
.
.
MADE IN CHINA
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000