Pyle PHITB65BK User Manual

Pyle PHITB65BK Manual

Pyle PHITB65BK manual content summary:

  • Pyle PHITB65BK | User Manual - Page 1
    Tower Speaker with Bluetooth PHITB65BK
  • Pyle PHITB65BK | User Manual - Page 2
    ...1 IMPORTANT INSTRUCTIONS 2~3 IMPORTANT NOTES...4 PRODUCT FEATURE...5 PREPARATION FOR USE 5 LOCATION OF CONTROL 6 REMOTE CONTROL 7 BATTERY INSTALLING AND REPLACING REMOTE CONTROL 7~8 INSTALLATION...8 OPERATION THE UNIT 9-14 CARE AND MAINTENANCE 15 TROUBLE SHOOTING GUIDE 15 SPECIFICATION
  • Pyle PHITB65BK | User Manual - Page 3
    using electrical products, especially when children are present. Congratulations on your purchase of Tower Speaker System. To get the most from your speaker system, please take a few minutes to read these instructions. WARNING - To reduce the risk of fire, electric shock or serious personal injury
  • Pyle PHITB65BK | User Manual - Page 4
    3. Read this instruction manual carefully before you attempt to use the unit. 4. Consult your dealer or service personnel if you have electrical shock. 18. Press the buttons gently. Pressing them too hard can damage the speaker. 19. Do not push any objects into holes, slots, or openings on the unit
  • Pyle PHITB65BK | User Manual - Page 5
    OUTPUT AFTER 15 MINUTES TO SAVE ENERGY. PRODUCT FEATURES This Tower Speaker with Bluethooth with following features: • 2.1 CH Stereo Home Theater Sound • Bluetooth-ISSC, A2DP with Auto Pairing • Play And Stream Your Music From Any Bluetooth Device • FM PLL Tuner with 30 Station Memory Presets FM
  • Pyle PHITB65BK | User Manual - Page 6
    't remove any labels or sticker on the rear of the unit and adaptor. Before setting up the unit, verify that the following accessories are present:  Instruction manual x 1  Remote control x 1  3.5mm audio cable x1  Smart phones supporter x1  Wooden base x1  Screws x4.  Mini screwdriver x1 5
  • Pyle PHITB65BK | User Manual - Page 7
    + button 7. MEM/STOP button 8. Play&pause/dimmer 9. 3.5mm Aux in jack 10. USB port 11. Remote slot 12. Stand by light 13. Sleep light 14. Bluetooth light 15. Antena wire 16. RCA input jack 17. AC cord 18. Main Power switch 6
  • Pyle PHITB65BK | User Manual - Page 8
    REMOTE CONTROL 1. Standby button 2. Mute button 3. Mem- button 4. Mem+ button 5. EQ button 6. Repeat button 7. Dimmer button 8. Source button 9. Skip -/tune - button 10. Pairing button 11. Skip +/tune + button 12. Program button 13. Volume - button 14. Volume + button 15. Clock Button 16. Sleep
  • Pyle PHITB65BK | User Manual - Page 9
    Installing and replacing the batteries on the remote control The remote control requires one "CR2025" type 3V lithium battery (Included), to extend the life of the original battery; a small clear plastic spacer tab has been inserted between the lithium battery and the battery terminal. In order to
  • Pyle PHITB65BK | User Manual - Page 10
    signal for operation. Don't put any objects between the unit and the remote control while operating the unit. INSTALLATION 1. Fix the wooden base to the tower with screws 2. Connect main unit to AC power source. 3. Remove the clear tab from remote control. TURNING THE UNIT POWER ON/OFF 1. In Standby
  • Pyle PHITB65BK | User Manual - Page 11
    weak stations if a station gets skipped. With strong signals, the tuner may stop before it reaches the actual broadcast frequency, so you may need to manually tune for the best reception. PRESET RADIO STATIONS This unit has 30 preset memories for the FM radio. 1. Press the button to turn on the
  • Pyle PHITB65BK | User Manual - Page 12
    of the remote or MEM/STOP of the panel. LISTENING TO A BLUETOOTH ENABLED DEVICE 1. If the PHITB65BK has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the PHITB65BK with your Bluetooth device. • Press the button to turn on the unit. • Tap
  • Pyle PHITB65BK | User Manual - Page 13
    : 1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth operation since it may vary from model to model. 2. If your Bluetooth enabled device does not support A2DP profile, it will not play the music through the speaker, even if paired (linked
  • Pyle PHITB65BK | User Manual - Page 14
    device battery charging only and it cannot support data transfer or connect to computer. USB port. Please refer to your device user manual before you attempt to charge them. 2. It It has three levels. SLEEP TIMER OPERATIONS 1. In Radio, Bluetooth USB or AUX mode, when you press the Sleep Button once
  • Pyle PHITB65BK | User Manual - Page 15
    unit provides two differant auxiliary audio signal input jacks for connecting external audio devices like MP3 players, CD players and listen to them through the speakers of this unit One is 3.5mm input jack,the other is RCA input jack. 1. Use an audio cable ( included) with one 3.5 mm stereo plug on
  • Pyle PHITB65BK | User Manual - Page 16
    4. To select auxiliary audio input, tap the Source Button to select AUX mode. "AUX" icon appears on display. 5. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual. Note: • If you connect this unit to the Line-Out Jack of your
  • Pyle PHITB65BK | User Manual - Page 17
    TROUBLE SHOOTING GUILDE Should the system exhibit a problem, please check the following before seeking service. Symptom Possible Problem Solution The for remote controller Bluetooth Power Output AC in : ~100-240V 50/60Hz 50W 87.5~108Mhz 17dbm. music playing support MP3 format, memory
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Tower Speaker with Bluetooth
PHITB65BK